2006. 03. 2, csütörtök keltezéssel 15.33-kor alan ezt írta: > Try this: > > Add 'pci=assign-busses' to your kernel load line in /etc/grub.conf.
Thx for the quick and WORKING solution! Now, when I insert my card, I have immediatly this message in dmesg: PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 16 wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 7.8 phy 4.5 radio 5.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xe8400000, irq=16 So normaly just apt-get the pcmciautils package and change the /boot/grub/menu.lst file what is mentioned above. Thank you again! Khiraly _______________________________________________ LinuxR3000 mailing list [email protected] http://lists.pcxperience.com/cgi-bin/mailman/listinfo/linuxr3000 Wiki at http://prinsig.se/weekee/
