No insult taken.  I know about the alternate consoles.  I can't get to
them.  When it locks into the blank screen, it either locks them up or
they're disabled.  That's the first thing I try when I have any type of
window manager issue.  I'm competent enough on the command line that I can
dig myself out of some graphical holes; it doesn't help that I can't get to
it.

On Sun, Feb 7, 2010 at 12:53 PM, Bryan Smith <[email protected]> wrote:

> Scott,
>
> Scott Vargovich wrote:
> > Bryan,
> >
> > I have no idea why the Xorg -configure generated file detects a double
> > GPU setup.  The machine I'm doing this on is a laptop.  The xdm and slim
> > managers offer me no help because I can't get to a shell in anything but
> > the working 2.6.26 kernel.  I even tried dumping gdm until I realized it
> > would take out gnome-desktop-environment as well.  I also purged and
> > reinstalled xserver-xorg like you suggested - no change.
> So you are saying that you have no virtual terminals on tty1-6? This
> can't be? Hit Ctrl+Alt+F1-6 and see if you get a prompt, F7 is your gui.
> If I just insulted you I'm sorry, but there surely has to tty's there. I
> was suggesting you log in to tty2(Ctrl+Alt+F2), stop GDM then run startx
>
> >
> >  I'll give the rest of the day for other suggestions - and then tomorrow
> > I'm going to wipe and reinstall.  I probably should do that anyway
> > because the dist-upgrade to squeeze broke.  You now need to use a new
> > script called smxi.  I should probably pay more attention to which
> > kernel I'm allowing to be installed as well as what else is going on.
> > Before dist-upgrade broke, I actually had squeeze working.  I shouldn't
> > have abandoned it.  I guess hindsight is 20/20.
>
> What version of udev do you have?(sudo udevd -V) Since when has smxi
> become a replacement for apt-get? It a script that actually uses apt-get
> or aptitude as far as I know. It's great for things but all it does is
> run a dist-upgrade for you :o)
>
> >
> > Thanks for all the help and suggestions,
> > Scott
> >
> > On Sun, Feb 7, 2010 at 10:57 AM, Bryan Smith <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >     Reinstall, phew that is a murder, you can always go that route but
> where
> >     is the fun in that.
> >
> >     What happens when you run startx? You have to install xinit to have
> it
> >     btw. Run startx as root and  your user. Install slim or xdm and see
> if
> >     you have the same issue. I have found a combination of factors like
> >     .xsession/.xinitrc and different display managers make a difference.
> >     apt-get purge xserver-xorg then reinstall it before you go scrapping
> the
> >     whole install.
> >
> >     Why does your system see two GPU's? When you ran apt-get dist-upgrade
> >     did you choose to install the latest udev or not?
> >
> >
> >     Bryan
> >
> >
> >     Scott Vargovich wrote:
> >     > Bryan,
> >     >
> >     > Yes - I've tried both vesa and no conf file.  None of the kernels
> work
> >     > with vesa and only the 2.6.26 kernel works with no conf.  Should I
> >     just
> >     > try re-installing???
> >     >
> >     > Scott
> >     >
> >     > On Sun, Feb 7, 2010 at 3:27 AM, Bryan Smith
> >     <[email protected] <mailto:[email protected]>
> >     > <mailto:[email protected] <mailto:[email protected]>>>
> >     wrote:
> >     >
> >     >
> >     >
> >     >     Scott Vargovich wrote:
> >     >     > Hi there,
> >     >     >
> >     >     > Here's my pastebin:
> >     >     >
> >     >     > http://pastebin.org/87336
> >     >     >
> >     >     > I was hoping to not have any issues after upgrading to
> >     Squeeze, but
> >     >     > that's not the case.  The upgrade went fine after I figured
> >     out how to
> >     >     > work around the broken packages issue.  I now have 3 kernels
> -
> >     >     > 2.6.26-2-686, 2.6.30-2-686 and 2.6.32-trunk-686.
> >     >     I'm using squeeze also and it was a hassle free upgrade.
> >     >     >
> >     >     > When I initially booted to the 2.6.32 kernel - the
> >     xorg.conf.orig was
> >     >     > the /etc/X11/xorg.conf.  With this one, the 2.6.32 kernel
> >     would boot,
> >     >     > but when GDM was supposed to put the login screen, it was
> >     instead a
> >     >     > blank black screen with a bit of backlighting.  In the
> >     2.6.30 kernel,
> >     >     > GDM started and then the screen went totally black - like
> >     the computer
> >     >     > was turned off.  The 2.6.26 kernel worked fine.  The only
> >     thing I
> >     >     had to
> >     >     > do was put a link in my startup files to start metacity
> >     because the
> >     >     > window dressings were gone.  It's worked fine ever since.
> >     >     >
> >     >     > The xorg.conf.config was created by doing 'Xorg -configure'
> >     as root.
> >     >     > When I used it, none of the kernels worked right.
> >     >     >
> >     >     > When I renamed both files to what they are in the pastebin
> >     and had no
> >     >     > xorg.conf file, the same thing happened when the
> xorg.conf.orig
> >     >     was the
> >     >     > xorg.conf file.
> >     >     >
> >     >     This is a bit confusing, though I looked at your pastebin and
> >     it seems
> >     >     your system has gained an extra GPU since you were last
> >     running Lenny?
> >     >     Your second conf shows a dual head setup that Xorg -configure
> >     has detect
> >     >     for you. Have you tried removing your confs all together and
> >     restarting
> >     >     GDM?
> >     >
> >     >     > I haven't needed to work with X nor GDM for quite a while
> >     because the
> >     >     > distros I've used has been pretty much plug & play.  I know
> >     there's a
> >     >     > way to fix this, but my computer specialty doesn't cover this
> >     >     area.  Any
> >     >     > help or questions would be promptly answered and greatly
> >     appreciated.
> >     >     >
> >     >     Out of desperation did you try putting vesa in your conf
> >     instead of
> >     >     intel?
> >     >
> >     >     > Thanks in advance,
> >     >     > Scott
> >     >     >
> >     >     > --
> >     >     > <><  Scott Vargovich  <><
> >     >     > ------------------------------------------
> >     >     > OpenPGP Key ID: F8F5DC7E
> >     >     > ------------------------------------------
> >     >     >
> >     >     > --
> >     >     > You received this message because you are subscribed to the
> >     Linux
> >     >     Users
> >     >     > Group.
> >     >     > To post a message, send email to
> >     [email protected]
> >     <mailto:[email protected]>
> >     >     <mailto:[email protected]
> >     <mailto:[email protected]>>
> >     >     > To unsubscribe, send email to
> >     >     [email protected]
> >     <mailto:[email protected]>
> >     >     <mailto:[email protected]
> >     <mailto:[email protected]>>
> >     >     > For more options, visit our group at
> >     >     > http://groups.google.com/group/linuxusersgroup
> >     >
> >     >     --
> >     >     A healthy diet includes Linux, Linux and more Linux.
> >     >
> >     >     --
> >     >     You received this message because you are subscribed to the
> Linux
> >     >     Users Group.
> >     >     To post a message, send email to
> >     [email protected]
> >     <mailto:[email protected]>
> >     >     <mailto:[email protected]
> >     <mailto:[email protected]>>
> >     >     To unsubscribe, send email to
> >     >     [email protected]
> >     <mailto:[email protected]>
> >     >     <mailto:[email protected]
> >     <mailto:[email protected]>>
> >     >     For more options, visit our group at
> >     >     http://groups.google.com/group/linuxusersgroup
> >     >
> >     >
> >     >
> >     >
> >     > --
> >     > <><  Scott Vargovich  <><
> >     > ------------------------------------------
> >     > OpenPGP Key ID: F8F5DC7E
> >     > ------------------------------------------
> >     >
> >     > --
> >     > You received this message because you are subscribed to the Linux
> >     Users
> >     > Group.
> >     > To post a message, send email to [email protected]
> >     <mailto:[email protected]>
> >     > To unsubscribe, send email to
> >     [email protected]
> >     <mailto:[email protected]>
> >     > For more options, visit our group at
> >     > http://groups.google.com/group/linuxusersgroup
> >
> >     --
> >     A healthy diet includes Linux, Linux and more Linux.
> >
> >     --
> >     You received this message because you are subscribed to the Linux
> >     Users Group.
> >     To post a message, send email to [email protected]
> >     <mailto:[email protected]>
> >     To unsubscribe, send email to
> >     [email protected]
> >     <mailto:[email protected]>
> >     For more options, visit our group at
> >     http://groups.google.com/group/linuxusersgroup
> >
> >
> >
> >
> > --
> > <><  Scott Vargovich  <><
> > ------------------------------------------
> > OpenPGP Key ID: F8F5DC7E
> > ------------------------------------------
> >
> > --
> > You received this message because you are subscribed to the Linux Users
> > Group.
> > To post a message, send email to [email protected]
> > To unsubscribe, send email to
> [email protected]
> > For more options, visit our group at
> > http://groups.google.com/group/linuxusersgroup
>
> --
> A healthy diet includes Linux, Linux and more Linux.
>
> --
> You received this message because you are subscribed to the Linux Users
> Group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to [email protected]
> For more options, visit our group at
> http://groups.google.com/group/linuxusersgroup
>



-- 
<><  Scott Vargovich  <><
------------------------------------------
OpenPGP Key ID: F8F5DC7E
------------------------------------------

-- 
You received this message because you are subscribed to the Linux Users Group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
For more options, visit our group at 
http://groups.google.com/group/linuxusersgroup

Reply via email to