Ok.. Thank you Sent from iPhone....sorry for typos
> On 30-Sep-2015, at 10:24 AM, Niall Brady <[email protected]> wrote: > > your custom boot images will continue to work but you won't be able to > access certain tabs on them (see my blog post on upgrading above), however > it's recommended to re-build your custom boot images in the newer version of > WinPE. > >> On Wed, Sep 30, 2015 at 1:49 AM, Hun boy <[email protected]> wrote: >> Sorry to jump in here... Am also in same situation... >> >> I have ADK 8.0 on my sccm and my custom boot image created on it WIG SCCM >> 2012 Sp1..After migration to ADK 8.1 or ADK 10 or Sp2/R2 >> Will my boot image works?? For my task sequence or is it mandatory to >> recreate the bootImage with my previous customisation? >> >> Thanks, >> Hunboy >> >> Sent from iPhone....sorry for typos >> >>> On 29-Sep-2015, at 10:47 AM, Corkill, Daniel >>> <[email protected]> wrote: >>> >>> This is definitely a tested and confirmed scenario (going with ADK 10 from >>> the get go)? From >>> http://blogs.technet.com/b/configmgrteam/archive/2015/08/05/windows-10-adk-and-configuration-manager.aspx: >>> >>> >>> >>> What about new installs of Configuration Manager 2012? The Windows 8.1 ADK >>> is still the setup prerequisite so that will need to be used during initial >>> installation. But afterwards you can follow the above process to install >>> the newer Windows 10 ADK. >>> >>> >>> >>> And in the comments people go on to ask about upgrades from older versions >>> of CM (my situation), and the response: >>> >>> there's a blurb above about a new install which also applies to an upgrade >>> scenario. You need to wait to swap out the ADK after you upgrade to R2 SP1. >>> >>> >>> >>> I don’t want to make things harder than they need to be and my preference >>> is to go to ADK 10 straight away. >>> >>> >>> >>> Daniel. >>> >>> >>> >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Niall Brady >>> Sent: Monday, 28 September 2015 2:48 PM >>> To: [email protected] >>> Subject: Re: [mssms] RE: Upgrading CM2012 SP1 to the latest and greatest >>> >>> >>> >>> ADK 10 is not a requirement you can go ahead with ADK 8.1 installed and >>> later upgrade the boot wim's to support Windows 10 deployments, however if >>> deploying Windows 10 is your goal then go with ADK 10 from the get go >>> >>> more info below: >>> >>> http://blogs.technet.com/b/configmgrteam/archive/2015/05/19/sysctr-2012-configmgr-sp2-and-systctr-2012-r2-configmgr-sp1-faq.aspx >>> http://www.windows-noob.com/forums/topic/12852-how-can-i-upgrade-to-system-center-2012-r2-sp1-with-mdt-2013-update-1-integrated/ >>> >>> >>> On Mon, Sep 28, 2015 at 3:22 AM, Sean Pomeroy <[email protected]> >>> wrote: >>> >>> One of the pre-requisites for SP2 / R2 SP1 is ADK 10. >>> >>> So you will uninstall your existing ADK and install ADK 10 before you even >>> start the upgrade. >>> >>> >>> >>> On Sun, Sep 27, 2015 at 6:01 PM Corkill, Daniel >>> <[email protected]> wrote: >>> >>> Would I be able to go to ADK 10 from the get go or will I need to go with >>> ADK 8.1 and after everything is upgraded go to ADK 10? >>> >>> >>> >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Nash Pherson >>> Sent: Sunday, 27 September 2015 5:37 AM >>> >>> >>> To: [email protected] >>> Subject: [mssms] RE: Upgrading CM2012 SP1 to the latest and greatest >>> >>> >>> >>> Easiest thing would be to just install SP2, and then enable the R2 bits, >>> and then install the latest CU for SP2 / R2 SP1. >>> >>> >>> >>> http://blog.configmgrftw.com/service-pack-madness/ >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Corkill, Daniel >>> Sent: Thursday, September 24, 2015 9:17 PM >>> To: [email protected] >>> Subject: [mssms] Upgrading CM2012 SP1 to the latest and greatest >>> >>> >>> >>> Hi all, >>> >>> >>> >>> CM 2012 SP1 CU3 – looking for some guidance on getting this to 2012 R2 SP1 >>> CU1. From doing some research I think the path forward is SP2->R2->CU1. >>> >>> >>> >>> I can find guides from last year on how to get SP1 to R2 and recent guides >>> covering R2 to SP1 but I can’t find anything covering the process I’m >>> trying to do. I’d also like to incorporate the latest versions of MDT and >>> ADK (for Win10 support). >>> >>> >>> >>> Daniel. >>> >>> >>> >>> >>> ********************************************************************* >>> This email, including any attachment, is confidential to the intended >>> recipient. It may also be privileged and may be subject to copyright. If >>> you have received this email in error, please notify the sender immediately >>> and delete all copies of the email. Any confidentiality or privilege is >>> not waived. Neither the Council nor the sender warrant that this email >>> does not contain any viruses or other unsolicited items. >>> >>> This email is an informal Council communication. The Council only accepts >>> responsibility for information sent under official letterhead and duly >>> signed by, or on behalf of, the Chief Executive Officer. >>> >>> Privacy Collection Notice >>> Logan City Council may collect your personal information, e.g. name, >>> residential address, phone number etc, in order to conduct its business >>> and/or meet its statutory obligations. The information will only be >>> accessed by employees and/or Councillors of Logan City Council for Council >>> business related activities only. If your personal information will be >>> passed onto a third party, Council will advise you of this disclosure, the >>> purpose of the disclosure and reason why. Your information will not be >>> given to any other person or agency unless you have given us permission or >>> we are required by law. >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> ********************************************************************* >>> This email, including any attachment, is confidential to the intended >>> recipient. It may also be privileged and may be subject to copyright. If >>> you have received this email in error, please notify the sender immediately >>> and delete all copies of the email. Any confidentiality or privilege is >>> not waived. Neither the Council nor the sender warrant that this email >>> does not contain any viruses or other unsolicited items. >>> >>> This email is an informal Council communication. The Council only accepts >>> responsibility for information sent under official letterhead and duly >>> signed by, or on behalf of, the Chief Executive Officer. >>> >>> Privacy Collection Notice >>> Logan City Council may collect your personal information, e.g. name, >>> residential address, phone number etc, in order to conduct its business >>> and/or meet its statutory obligations. The information will only be >>> accessed by employees and/or Councillors of Logan City Council for Council >>> business related activities only. If your personal information will be >>> passed onto a third party, Council will advise you of this disclosure, the >>> purpose of the disclosure and reason why. Your information will not be >>> given to any other person or agency unless you have given us permission or >>> we are required by law. >>> > >
