"Ron Rogers" wrote: > The correct way to secure wiring and cables in a mast is to rivet a > PVC > conduit inside the mast and pass the cable and wiring through it.
An alternate I've used is to run a 1/16" S/S messenger cable, secured top and bottom of mast, then attach co-ax to messenger cable with nylon Ty-Raps every 24" rotating tails 90 degrees between Ty-Raps. Leave tails on Ty-Raps and they will prevent any "slapping" of cable against mast wall. Make sure co-ax has a drip loop between antenna and entry into mast. YMMV Have fun. Lew _______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [email protected] To unsubscribe send an email to [email protected] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
