Hi Veerendranatha,

Please check inline below.

-----Original Message-----
From: Veerendranatha Reddy V 
<veerendranatha.reddy.v=40ericsson....@dmarc.ietf.org> 
Sent: 19 August 2020 10:03
To: Ketan Talaulikar (ketant) <ket...@cisco.com>; Peter Psenak (ppsenak) 
<ppse...@cisco.com>; lsr@ietf.org
Subject: RE: [Lsr] Regarding OSPF Extended Prefix Range TLV usage for 
External/NSSA prefixes defined in RFC 8665

Hi Ketan,
Please find the response in line.
The IA flag in the OSPF Extended Prefix Range TLV does not indicate that the 
prefix-SID mapping advertised via it is for use for only intra or inter area 
prefixes. The mappings can be used for assignment of SIDs for ALL types of OSPF 
prefixes - regardless of the IA bit.
The IA flag is only to prevent looping during flooding of area-scoped LSAs with 
OSPF Extended Prefix Range TLVs when they are propagated across areas.

[V] As per RFC,
IA-Flag:  Inter-Area Flag.  If set, advertisement is of
               inter-area type.  An Area Border Router (ABR) that is
               advertising the OSPF Extended Prefix Range TLV between
               areas MUST set this bit.
I thought, when prefix Ranges with SID are advertised from Intra to Inter, we 
need to set this flag. So that it indicates the prefixes are of inter area 
type. Please let me know if my understanding is not correct.
[KT] What is says is "the prefix range advertisement is of type inter-area or 
intra-area" (think of it as somewhat equivalent of the D bit in ISIS when 
leaking across levels). That does not mean that the advertised mappings need to 
be used for only for intra or inter area prefixes respectively.

When OSPF Extended Prefix Range TLVs are advertised using AS-scope, the NSSA 
notion does not apply for them and does not restrict their flooding into or 
from NSSA areas (or stub areas for that matter).
[V] If ASBR is part of NSSA, and if we redistributed Prefix SIDs learnt form 
other protocols or other instance of OSPF, and those prefixes are result of 
Range TLV  in that protocol, we can apply range in dest  ospf instance 
[KT] I do not follow above statement - can you please try to 
elaborate/re-phrase?

Thanks,
Ketan

Thanks & Regards,
Veerendranath


-----Original Message-----
From: Ketan Talaulikar (ketant) <ketant=40cisco....@dmarc.ietf.org>
Sent: Tuesday, August 18, 2020 11:28 PM
To: Peter Psenak <ppse...@cisco.com>; Veerendranatha Reddy V 
<veerendranatha.redd...@ericsson.com>; lsr@ietf.org
Subject: RE: [Lsr] Regarding OSPF Extended Prefix Range TLV usage for 
External/NSSA prefixes defined in RFC 8665

The IA flag in the OSPF Extended Prefix Range TLV does not indicate that the 
prefix-SID mapping advertised via it is for use for only intra or inter area 
prefixes. The mappings can be used for assignment of SIDs for ALL types of OSPF 
prefixes - regardless of the IA bit.

The IA flag is only to prevent looping during flooding of area-scoped LSAs with 
OSPF Extended Prefix Range TLVs when they are propagated across areas.

When OSPF Extended Prefix Range TLVs are advertised using AS-scope, the NSSA 
notion does not apply for them and does not restrict their flooding into or 
from NSSA areas (or stub areas for that matter).

I am not sure if that answers your question.

Thanks,
Ketan

-----Original Message-----
From: Lsr <lsr-boun...@ietf.org> On Behalf Of Peter Psenak
Sent: 18 August 2020 23:06
To: Veerendranatha Reddy V 
<veerendranatha.reddy.v=40ericsson....@dmarc.ietf.org>; lsr@ietf.org
Subject: Re: [Lsr] Regarding OSPF Extended Prefix Range TLV usage for 
External/NSSA prefixes defined in RFC 8665

Veerendranath,

On 18/08/2020 16:40, Veerendranatha Reddy V wrote:
> Hi Authors, All,
> 
> OSPF Extended Prefix Range TLV defined in RFC 8665 has IA flag to 
> distinguish between Intra and Inter Area scope prefixes.
> 
> Whether any restrictions to not to use Prefix Range TLV for 
> external/NSSA prefixes ?

I don't see how you can use OSPF Extended Prefix Range TLV for NSSA, the usage 
of OSPF Extended Prefix Range TLV has only been defined in the context of RFC 
8665.

thanks,
Peter


> 
> For External Prefixes, we can able to use  Prefix Range TLV  by using 
> LSA type (based on AS scope Opaque Type , so the TLV is for External
> Prefixes)
> 
> But If we need to use the Prefix Range TLV for NSSA prefixes (Type-7) 
> , which are in area scope, there is no flag/route-type field in this 
> TLV to distinguish between Intra or NSSA prefixes( as IA flag will not 
> be set anyway).
> 
> Thanks & Regards,
> 
> Veerendranath
> 

_______________________________________________
Lsr mailing list
Lsr@ietf.org
https://www.ietf.org/mailman/listinfo/lsr
_______________________________________________
Lsr mailing list
Lsr@ietf.org
https://www.ietf.org/mailman/listinfo/lsr

Reply via email to