On Tue, Nov 17, 2020 at 3:36 AM Robert Raszuk <rob...@raszuk.net> wrote:
>
>
> Robert, I believe the original intention was related to having the data
>> plane converge quickly when summarization is used and flip so traffic
>> converges from the Active ABR to the Backup ABR.
>>
>
> I do not buy this use case. Flooding within the area is fast such that
> both ABRs will get the same info. As mentioned before there is no practical
> use of PUA for making any routing or fwd decision on which ABR to use. If
> your ABRs are not connected with min redundancy this draft is a worst patch
> ever to work around such a design.
>
Gyan> Agreed. The point of PUA in ABR use case is the ability to track
the component prefixes and in case where component is down and traffic is
still forwarded to the ABR and dropped. The other more important use case
is when links are down within the area and the area is partitioned and so
one ABR has all component prefixes however other ABR is missing half the
component prefixes. So since the ABR will by default advertise the summary
as long as their is one component UP the summary is still advertised. So
this use case is severely impacting as now you have an ECMP path to the
other area for the summary via the two ABRs and you drop half your
traffic. So now with PUA the problem is fixed and the PUA is sent and now
traffic is only sent to the ABR that has the component prefixes.
>
> Please present us a picture indicating before and after ABRs behaviour.
>
Gyan> will do
>
> However PUA can be used in the absence of area segmentation within a
>> single area when a link or node fails to converge the data plane quickly by
>> sending PUA for the backup path so the active path.
>>
>
> If there is no area segmentation then there is no summaries. So what are
> we missing in the first place ?
>
Gyan> Sorry I am stating that PUA feature can also be used intra area
where if a link or node goes down to improve data plane convergence.
>
>
>
>> With the IGP tuned with BFD fast detection on ISIS or OSPF links and LFA
>> & RLFA for MPLS or TI-LFA for SR local protection - with those tweaks the
>> convergence is well into sub second. So for Intra area convergence with
>> all the optimizations mentioned I am not sure how much faster the data
>> plane will converge with PUA.
>>
>
> Even without any of the above listed chain of acronymous things will
> generally work well intra-area without PUAs.
>
Gyan> Agreed which is why I mentioned the BGP next hop self use case if
I could figure out how PUA could help there that would be a major benefit
of PUA.
>
> Thx,
> R.
>
>
> --
<http://www.verizon.com/>
*Gyan Mishra*
*Network Solutions A**rchitect *
*M 301 502-134713101 Columbia Pike *Silver Spring, MD
_______________________________________________
Lsr mailing list
Lsr@ietf.org
https://www.ietf.org/mailman/listinfo/lsr
