The ltsp_sound-0.1c-8.i386.rpm IS still AVAILIBLE from k12ltsp.org.. ftp://k12linux.mesd.k12.or.us/pub/distributions/ISO/K12LTSP-7.2/RPMS/
> So what I did do in order to get workstation sound and sound mixing to > work with XMMS and ltsp-3.0.0: > > 1) I did read this mailing list and found out about various bits and > pieces.. > > 2) Downloaded ltsp_sound-0.1c-8.i386.rpm package from k12ltsp.org ftp > as it turned out that ltspsound-0.1b.tar.gz package found on LTSP > sourceforge page isn't updated to ltsp-3.0.0. This > ltsp_sound-0.1c-8.i386.rpm package seems not to be availible anymore > from k12ltsp.org. I still have this rpm package and it can be > downloaded from here: > https://kingpool.pfm.ee/ltsp/ltsp_sound-0.1c-8.i386.rpm. It also seems > that there are differences between ltspsound-0.1c.tar.gz and > ltsp_sound-0.1c-8.i386.rpm package. > > 3) Installed the rpm. > > 4) Modified lts.conf, added "SOUND=Y" and "SMODULE=es1371.o" to > workstation config section as I use SB PCI 128 card (modprobe loads > all other dependent modules that are needed) > > 5) Launched XMMS wrapped by esddsp (type "esddsp -m xmms" at terminal) > and configured XMMS to use OSS as output. When selecting ESD for > output mixing is not working althou sound works. > > Mixing almost works as it should with one exeption - when I press > next button on XMMS or fast forward/rewind it doesnt allow to change > volume-pan until I press some of these buttons again. Seems that XMMS > changes volume control to Master instead of PCM when I press these > buttons and switches again back to PCM control when I press buttons > again...hmm..bizarre.. (if anybody knows why is that happening - let > us all know!) > So if you configure XMMS to use OSS as output don't mark "Volume > controls Master instead PCM" in mixer TAB. > > > I used Mandrake-8.1, XMMS-1.2.5, LTSP-3.0.0 and IceWM 1.0.9 > > > > -- ---------------------- Andres Toomsalu mail: [EMAIL PROTECTED] http://www.pfm.ee _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
