CyberOrg wrote: > On Thu, Jul 10, 2008 at 4:43 PM, Shrenik Bhura > <[EMAIL PROTECTED]> wrote: > > >>> Change the port to whatever you want. >>> >>> >> In /srv/tftpboot/KIWI/config.default >> >> NBDROOT=192.168.2.1;2001 >> >> > > Change /srv/tftpboot/KIWI/config.default after running > "kiwi-ltsp-setup -c". Also change /etc/xinet.d/nbdroot to run on port > 2001. > > Running services on unusual ports is not really recommended, unless > you know what changes you would need to make. It is best to run LTSP > server on another hardware. > Had done this as well. > >> One test system returns an error 'Network module: : Failed to load >> network module !" which I believe could be due to a non-standard network >> interface(from Altastic) >> > > Which module does it use? > > >> and another just waits indefinitely in the section >> Loading KIWI Boot-system ... >> --snip -- >> -------> Kernel logging enabled on: /dev/tty4 >> >> > > Fix the nbdroot port problem and we will look at this after that. >
Also added nbdPort=2001 in /srv/tftpboot/pxelinux.cfg/default Yet the problem persists. SB ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
