Typo, I meant NO_SYS = 0. I think this is an issue with my eMac Config not lwip. I'm going to try the enet echo for the omapl138, which is part of the TI starterware.
My expectation is that the eMac RX callback or interrupt should break with broadcast packets or for example if I ping the device, even if lwip is not configured but as long as the netif is up. Can the raw api be used with an OS or is it exclusively for none os implementations ? Sent from my iPhone > On Jul 7, 2016, at 13:43, Sylvain Rochet <grada...@gradator.net> wrote: > > Hi, > >> On Wed, Jul 06, 2016 at 02:01:26PM -0500, Jaime Fernández wrote: >> >> NO_SYS = 1, I'm using TI sysbios kernel. >> My laptop NIC is configured to ip= 192.168.10.1, sm = 255.255.255.0, >> gw= empty. My board netif is configure to ip=192.168.10.3, same subnet >> and gw=192.168.10.1. >> >> I have not tested the raw api as it is, per the documentation, >> intended for none os implementation. I have modified my code to use >> netconn instead of sockets. As I need to modulate the entire tcp >> packet. I have the netconn tcpecho working. > > Erm, how could you use netconn or sockets API with NO_SYS = 1 ? > > Sylvain > _______________________________________________ > lwip-users mailing list > lwip-users@nongnu.org > https://lists.nongnu.org/mailman/listinfo/lwip-users _______________________________________________ lwip-users mailing list lwip-users@nongnu.org https://lists.nongnu.org/mailman/listinfo/lwip-users
