Yes, either a real VT-100 or perhaps more common today an serial-VGA
board that accepts VT-100 codes.
Philip
On 27/01/2020 2:44 pm, r cs wrote:
Will the output be like something that could have been fed to
something like a VT-100?
Thanks,
rcs
On Sun, Jan 26, 2020 at 4:01 PM Philip Avery <pav...@xtra.co.nz
<mailto:pav...@xtra.co.nz>> wrote:
Short answer is no, at this stage.
Philip
On 27/01/2020 9:20 am, Fugu ME100 wrote:
> Will it be able to use a DVI for screen output?
>
> On 25/1/20, 8:39 PM, "M100 on behalf of Philip Avery"
> <m100-boun...@lists.bitchin100.com
<mailto:m100-boun...@lists.bitchin100.com> on behalf of
pav...@xtra.co.nz <mailto:pav...@xtra.co.nz>> wrote:
>
>> That will work with M100 CP/M. Same CP/M command (Stat) will
redirect
>> 'screen' output to the printer port if you like.
>> In fact you can redirect keyboard input from the serial as
well, so you
>> can just use the M100 as a processor if you want.
>>
>> Philip
>>
>> <snip>
>>>
>
--
/Níl aon tinteán mar do thinteán féin. /[Irish Gaelic]
(There is no fireside like your own fireside.)
