I think it's interesting if there are different revisions possible.
Anyone with an old rom could still dump theirs and compare with what's
already archived, or just publish what they have and others like me
would compare it.
--
bkw
On 12/19/20 9:08 PM, Steve Baker wrote:
Yep for sure, it’s widely available.
Sorry if I misread the prior note; I thought he was looking for the ROM
dump. No worries, thx.
Cheers,
SB
--
Greetings from Steve Baker
“Gravity brings me down...”
On Dec 19, 2020, at 9:00 PM, Greg Swallow <gswal...@mchsi.com> wrote:
Isn't the SR also included in the Rexx known compatible ROMs zip?
Dec 19, 2020 6:51:52 PM Steve Baker <stevebake...@gmail.com>:
Lastly, has this ROM been dumped? If not, I’ll pull it
off the PCB and read it.
Hello again — I posted my chip to the club100 website earlier
today, if that helps
http://www.club100.org/memfiles/index.php?&direction=0&order=&directory=Steve%20Baker
<http://www.club100.org/memfiles/index.php?&direction=0&order=&directory=Steve%20Baker>
Thanks,
SB
--
Greetings from Steve Baker
“Gravity brings me down...”
On Dec 19, 2020, at 8:24 PM, Jeffrey Birt <bir...@soigeneris.com>
wrote:
I’ll try the pic again as it seems the first one was too large.
Jeff Birt
*From:* M100 <m100-boun...@lists.bitchin100.com> *On Behalf Of
*Steve Baker
*Sent:* Saturday, December 19, 2020 7:07 PM
*To:* m...@bitchin100.com
*Subject:* Re: [M100] SuperROM
Another pic, not sure it was attached correctly...
--
Greetings from Steve Baker
“Gravity brings me down...”
On Dec 19, 2020, at 8:00 PM, Greg Swallow <gswal...@mchsi.com
<mailto:gswal...@mchsi.com>> wrote:
No edge for me to grab and my eyes are not good enough to
line it up. Maybe the attached photos can help.
<10081.jpg>
Dec 19, 2020 5:47:48 PM Jeffrey Birt <bir...@soigeneris.com
<mailto:bir...@soigeneris.com>>:
SuperROM –
Working on an M100 now that came with a SuperROM that had
stuck in the socket and the socket managed getting it
out. Socket replaced, but I am confused as to how the
SuperROM (SR) was ever intended to fit properly.
The SR gets stuck as while the Pin1/28 side is held up
from the bottom of the socket by the pin 1 tab on the SR
PCB, the opposite end drops down so far that the PCB
falls below the bend of the contacts. This lets the
contacts spring out over the top of the PCB and thus it
is stuck.
If I shim up the SR enough to prevent it getting stuck
then it pops out very easily. It seems to be a very poor
design. Perhaps there is some part of this one that is
missing? I could not find any images on the web that
clearly showed the SR board to compare to though.
The contact is also really poor, sometimes it will make
contact in the socket and sometimes not. It may be that
the PCB was damaged when it was wrestled out.
Lastly, has this ROM been dumped? If not, I’ll pull it
off the PCB and read it.
Thanks,
Jeff Birt
<IMG_9318_sm.jpg>
--
bkw