1 more questions (but there will likely be many more) Will I need some special program on the Model100 in order to access the "server." If so, what program?
Curtis On Thu, Feb 25, 2021 at 5:35 PM Brian K. White <b.kenyo...@gmail.com> wrote: > On 2/25/21 6:55 PM, AvantGuard Systems wrote: > > Steve, I found the mComm 2.5. It's for Windows. I see.... It's install > > program is called Setup250.exe! > > Ok, I have a Windows computer I can use. But maybe the linux one will > > work as well. > > On linux you would use the python version of mComm, or dlplus, or > LaddieAlpha since it does run with mono. > > I personally use dlplus on linux, but I will probably switch over to > python mComm sooner or later because the python version can be made > fully cross-platform more easily, and python is easier to hack on. It > already is cross-platform, but I mean even with nice user-friendly > packaging. > > > Any additional instructions for getting the ModelT to connect to the > > computer running mcomm? > > This is how you connect it: > http://tandy.wiki/Model_T_Serial_Cable > > That is the entire directions is just, ensure you have the right wiring > in the serial cable, and these are several known-good cables you can buy > already made, or follow that table to make your own, though the parts > cost more than a full pre-made cable does. > > -- > bkw >
