Thanks John, will try Laddie Alpha I alos think it has something to do with the size of the file, because small file transfers over dl+ works normally.
-- Kind regards / Mit freundlichen Grüßen ExPLIT IT Solutions Pawel Radomychelski -----Original Message----- From: John R. Hogerhuis <jho...@pobox.com> Reply-To: m...@bitchin100.com To: m...@bitchin100.com Subject: Re: [M100] Transferring ROM to REX# over DeskLink+ and USB2SERIAL hangs Date: Fri, 9 Jul 2021 18:03:13 -0700 This should work as far as I know... but Brian W now supports DL+. LaddieAlpha.EXE (runs on Mono) is known to work with the large Option ROM hex files and what we confirmed REX working with. -- John. On Fri, Jul 9, 2021 at 4:59 PM ExPLIT | Pawel Radomychelski <exp...@mailbox.org> wrote: > Hello collegues! > > Thanks to Steven, i got an REX# for my NEC PC-8201. > Anything is working fine, i have TS-DOS and Ultimate ROM II on my > REX#. > But if i want to install additional ROM (In my case R2CNEC) over the > REXMGR the transfer is somehow hanging... > > To my System: > I have an Debian 11 Notebook with USB2SERIAL Adapter installed, > DeskLink+ is working on /dev/ttyUSB0 > If i start to load the ROM from the REXMGR over TPDD it starts, but > than it hangs without any progress... > used > > this command: > dl /dev/ttyUSB0 -p=/media/sdb1/Firmware/Notebook/NEC/PC-8201/Option\ > ROM/ -v > > Also tried with -c Option for Hardware flow control. Same result. > > dl /dev/ttyUSB0 -p=/media/sdb1/Firmware/Notebook/NEC/PC-8201/Option\ > ROM/ -c -v > > > I attach the debugging file. Maybe some of you had the same prob. > > > Thanks > > >
