You beat me to it! I was just setting up a git repo of the files I used and got working.
https://github.com/Grimakis/Tandy-DVI-Gotek/tree/main One thing I will note, without adding a cskew=1 in my IMG file, I did not get it to work. On Mon, May 8, 2023 at 7:09 AM Josh Malone <josh.mal...@gmail.com> wrote: > I recently converted a DVI for Tandy collector. There was a fellow on this > list (I think) who had compatible images but in the end, the collector I > was doing the conversion for supplied working images on a drive. I've > posted it here: > > > https://drive.google.com/file/d/1cfH6ro03RoDosoi5P2CNwRaErn-vftOV/view?usp=share_link > > The image, however, is only part of the trick: you also need lines in > FF.CFG and IMG.CFG (You are running "FlashFloppy" on your Gotek, right?) > > FF.CFG: > > interface = ibmpc > host = unspecified > pin02 = nc > pin34 = nc > > > And IMG.CFG: > [m100dvi] > cyls=40 > heads=1 > secs=18 > bps=256 > h=0 > > Then make sure all your DVI images use filenames "<something>.m100dvi.img" > so that they pick up the geometry from IMG.CFG. > > Good luck! > > -Josh > > > On Mon, May 8, 2023 at 6:50 AM Gary Wilkinson <gpwilkin...@hotmail.com> > wrote: > >> Hi, This is the first time I've used a mailing list, so appologies if >> I've not done it correctly! I've been trying and failing to add a gotek to >> a DVI. Has anyone achieved this, and if so could you give me some pointers? >> I think one of the main issues is that I don't have a disk image. I tried >> to convert the DVI.TD0 disk image on the Club 100 library to a .IMG file >> without success. >> >