Hi Josh! It was your YouTube video that inspired me to try this! I asked a question in the comments, but I think you use a streaming service and so must have missed it. I’ve been updating my comments as I go along so others have an idea how to set this up. Thanks for the initial inspiration and for responding in here :)
Sent from my iPhone On 8 May 2023, at 12:09, Josh Malone <josh.mal...@gmail.com> wrote: I recently converted a DVI for Tandy collector. There was a fellow on this list (I think) who had compatible images but in the end, the collector I was doing the conversion for supplied working images on a drive. I've posted it here: https://drive.google.com/file/d/1cfH6ro03RoDosoi5P2CNwRaErn-vftOV/view?usp=share_link The image, however, is only part of the trick: you also need lines in FF.CFG and IMG.CFG (You are running "FlashFloppy" on your Gotek, right?) FF.CFG: interface = ibmpc host = unspecified pin02 = nc pin34 = nc And IMG.CFG: [m100dvi] cyls=40 heads=1 secs=18 bps=256 h=0 Then make sure all your DVI images use filenames "<something>.m100dvi.img" so that they pick up the geometry from IMG.CFG. Good luck! -Josh On Mon, May 8, 2023 at 6:50 AM Gary Wilkinson <gpwilkin...@hotmail.com<mailto:gpwilkin...@hotmail.com>> wrote: Hi, This is the first time I've used a mailing list, so appologies if I've not done it correctly! I've been trying and failing to add a gotek to a DVI. Has anyone achieved this, and if so could you give me some pointers? I think one of the main issues is that I don't have a disk image. I tried to convert the DVI.TD0 disk image on the Club 100 library to a .IMG file without success.
