yes i am going to buy some more because now it refuses to log in to my user account. I restart or shut down via the restart/shutdown button in the operating system
Am Samstag, 1. Oktober 2016 21:22:11 UTC+2 schrieb Charles Steinkuehler: > > On 10/1/2016 12:32 PM, Sag ich Dir nich wrote: > > thanks i was able to recover the config via Live "CD", > > > > i had 4 times, where something on the card (probably) was corrupted (3 > times i > > could not log in, i had to skip touchscreen calibration twice and it > would > > always reboot, the 4th time it wasnt even booting up), maybe the card is > > defective, should i get another sd card? > > I would suggest having some spare uSD cards on-hand (they are not very > expensive), but the card you have is probably OK. The filesystem can > become corrupt if you ever reset or remove power from your BeagleBone, > which needs to be shut down properly just like any other modern > computer. If you have not been doing any improper shutdowns, it is > more likely the card is defective. > > In my experience, often when I write a new image to the uSD (ideally > using bmaptool which doesn't write *EVERY* sector) a flaky uSD card > will work normally again. But if I have problems with the same uSD > card more than once, it goes into the trash bin (as I said above, they > are inexpensive...it's not worth the headache to work with a bad card). > > -- > Charles Steinkuehler > [email protected] <javascript:> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
