On 8/21/2017 5:59 PM, mugginsac wrote: > Charles, > > What terminal software are you using? > Is there any special setup required other than 115,200 baud and 8N1 > (data,parity, and stop bits)? > I can't get putty to work with the DE10 and I sometimes get those weird > single column scroll down the right hand side with minicom.
I'm using Putty on my Windows 7 box: 115,200 baud 8n1 no parity no flow control You might play with the terminal settings. I usually use VT100 or Linux, but I typically don't see any issues with either until I try using full-screen programs (like vi). Most anything should be OK for interacting with the U-Boot terminal prompt. -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.