Robert,
Thanks. At least it loaded right up as shown on the serial terminal. Now it
is at least looking for the ext4 filesystem before loading the ext2
filesystem.
Something that I read suggested that the journal-ing stuff on ext4 could
shorten the life of the uSD card but that the ext4 has higher performance.
Should I go ahead and change it back to an ext4 filesystem?
As far as I can tell it isn't activating the HDMI. When I hook up to the
monitor and keyboard (like with the other uSD) I don't see any action.
Also I don't see any action on the leds like the original uSD system. Is it
likely that it is failing to load the .rbf file?
I don't even know where it expects to find it. But I don't see any message
to indicate that it is looking for it and failing to find it.
Thanks again,
Alan
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
U-Boot SPL 2017.05-dirty (Aug 21 2017 - 18:44:30)
drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
drivers/ddr/altera/sequencer.c: CALIBRATION PASSED
drivers/ddr/altera/sequencer.c: Calibration complete
Trying to boot from MMC1
U-Boot 2017.05-dirty (Aug 21 2017 - 18:44:30 -0700)
CPU: Altera SoCFPGA Platform
FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0
BOOT: SD/MMC Internal Transceiver (3.0V)
Watchdog enabled
I2C: ready
DRAM: 1 GiB
MMC: dwmmc0@ff704000: 0
In: serial
Out: serial
Err: serial
Model: Terasic DE10-Nano
Net:
Error: ethernet@ff702000 address not set.
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
163 bytes read in 15 ms (9.8 KiB/s)
1: Linux 4.4.60-socfpga-r3
Retrieving file: /boot/vmlinuz-4.4.60-socfpga-r3
5223096 bytes read in 363 ms (13.7 MiB/s)
append: root=/dev/mmcblk0p2 ro rootwait quiet
Retrieving file: /boot/dtbs/4.4.60-socfpga-r3/socfpga_cyclone5_de10_nano.dtb
29940 bytes read in 30 ms (974.6 KiB/s)
## Flattened Device Tree blob at 02000000
Booting using the fdt blob at 0x2000000
reserving fdt memory region: addr=0 size=1000
Loading Device Tree to 03ff5000, end 03fff4f3 ... OK
Starting kernel ...
[ 0.000000] L2C: platform provided aux values permit register corruption.
[ 4.669971] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature
incompatibilities
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
Starting Flush Journal to Persistent Storage...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Raise network interfaces.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting DUN service...
Starting System Logging Service...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started DUN service.
Starting Connection service...
Starting Login Service...
Starting Cape Manager Service...
Starting Avahi mDNS/DNS-SD Stack...
Starting Telephony service...
Starting Generic Board Startup...
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started System Logging Service.
[ OK ] Started Cape Manager Service.
[ OK ] Started Generic Board Startup.
[ OK ] Started Telephony service.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Connection service.
[ OK ] Started Login Service.
Starting Hostname Service...
Starting WPA supplicant...
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
Starting Permit User Sessions...
[ OK ] Reached target Network is Online.
Starting LSB: Advanced IEEE 802.11 management daemon...
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
Starting OpenBSD Secure Shell server...
Starting The Apache HTTP Server...
[ OK ] Started Permit User Sessions.
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Started Hostname Service.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started The Apache HTTP Server.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux 9 arm ttyS0
default username:password is [debian:temppwd]
