Robert, Which button is the “boot” button? The picture I have labels them “Power” and “Reset”. Power is next to the RJ45 connector and reset is next to the board edge.
Is there one of the newer images that is small enough to flash on the A5 or A6? Thanks, Alan > On Aug 29, 2018, at 7:39 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > > On Tue, Aug 28, 2018 at 8:46 PM mugginsac <muggin...@gmail.com> wrote: >> >> I am trying to boot and log in over ethernet with ssh -X >> machinekit@beaglebone.local. This works with the 2017-02-12 image uSD. >> I used Etcher to flash both the 2017-02-12 image and the 2018-08-20 image to >> uSD. With the 2018-08-20 uSD I am seeing the outboard three of four LEDs go >> solid blue. The inboard LED of the four is not lighting. However, they just >> stay solid -- no flashing. >> With the 2017/2/12 image the 4 LEDs go solid and then I see the typical >> flashing during the boot process. >> >> Is there a problem with the 8/20 image? >> >> I am running this on an A6 BBB but I also tried it on a A5C BBB. Same >> results on both. I have a Xylotex DB25 cape on the board. > > > Hold down the "boot" button, your board just has a version of u-boot > (really old) in the eMMC that's doesn't understand the newer boot > scripts.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
