Robert, After I wrote the last message I found the “Boot” button on the picture. The problem is that it is under the DB25 cape.
Alan > On Aug 29, 2018, at 7:39 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > > On Tue, Aug 28, 2018 at 8:46 PM mugginsac <muggin...@gmail.com> wrote: >> >> I am trying to boot and log in over ethernet with ssh -X >> machinekit@beaglebone.local. This works with the 2017-02-12 image uSD. >> I used Etcher to flash both the 2017-02-12 image and the 2018-08-20 image to >> uSD. With the 2018-08-20 uSD I am seeing the outboard three of four LEDs go >> solid blue. The inboard LED of the four is not lighting. However, they just >> stay solid -- no flashing. >> With the 2017/2/12 image the 4 LEDs go solid and then I see the typical >> flashing during the boot process. >> >> Is there a problem with the 8/20 image? >> >> I am running this on an A6 BBB but I also tried it on a A5C BBB. Same >> results on both. I have a Xylotex DB25 cape on the board. > > > Hold down the "boot" button, your board just has a version of u-boot > (really old) in the eMMC that's doesn't understand the newer boot > scripts.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
