Actually ı am using cura with Ngcwriter extension.I sliced a stl file and save it as a .ngc and upload in machinekit program.Machinekit shows the file which ı uploaded but when ı run the program, it does not work. I should say that, ı did not connect any sensor or motor yet. Can it be about temperature sensor? Also ı want to ask you, there is no code which is velocity extrusion enable or how many extruder is connected(for definition) in your configuration. Before adding them,machinekit gave a problem for that. Do ı need to add them? I know that 'A' is used for extruder but ı used remap code(gcode to mcode).
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.