You need to start a bit further up. https://www.youtube.com/watch?v=sYwr0HMudRg
On Thursday, April 4, 2019 at 9:57:29 AM UTC-4, Daren Schwenke wrote: > > It's ok, but starting where you are starting from may take you a while. :) > The error tells you the file and line number in that file: PocketNC.hal: > 10: > The log also tells you where it was starting from: > /home/machinekit/machinekit/configs/ARM.BeagleBone.PocketNC-1 > From there find that file in a file browser, and then edit that file to > point to where it actually is. > > > On Thursday, April 4, 2019 at 9:48:33 AM UTC-4, Sardar Vayghannezgad wrote: >> >> I don't like to come across as one not making the tiniest background >> attempt at all, but I just don't know how to change the path. :| >> >> [image: Mailtrack] >> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality5&> >> Sender >> notified by >> Mailtrack >> <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality5&> >> 04/04/19, >> 4:43:54 PM >> >> On Thu, Apr 4, 2019 at 4:31 PM Bas de Bruijn <b...@basdebruijn.com> >> wrote: >> >>> Have you changed the path to setup.bridge.sh as Daren pointed out? >>> >>> On 4 Apr 2019, at 15:24, Sardar Vayghannezgad <sard...@gmail.com> wrote: >>> >>> I read online that starting as ssh -Y us...@beaglebone.local may help. >>> I am getting this if I start that way: >>> ln: cannot remove '/tmp/linuxcnc.print': Operation not permitted >>> ln: cannot remove '/tmp/linuxcnc.debug': Operation not permitted >>> >>> >>> >>> On Wednesday, April 3, 2019 at 11:19:08 PM UTC+3, Sardar Vayghannezgad >>> wrote: >>>> >>>> Once I start machinekit on my element14 BBB, the configuration window >>>> pops up with an array of configurations. But it looks like my favorite one >>>> won't load. I get the following: >>>> >>>> >>>> machinekit@beaglebone:~$ machinekit >>>> MACHINEKIT - 0.1 >>>> Machine configuration directory is >>>> '/home/machinekit/machinekit/configs/ARM.BeagleBone.PocketNC-1' >>>> Machine configuration file is 'PocketNC.ini' >>>> Starting Machinekit... >>>> rtapi_msgd command: /usr/libexec/linuxcnc/rtapi_msgd --instance=0 -- >>>> rtmsglevel=1 --usrmsglevel=1 --halsize=524288 >>>> rtapi_app command: /usr/libexec/linuxcnc/rtapi_app_rt-preempt -- >>>> instance=0 >>>> io started >>>> halcmd loadusr io started >>>> PocketNC.hal:10: execv(/home/machinekit/machinekit-dev/configs/ARM/ >>>> BeagleBone/PocketNC/setup.bridge.sh): No such file or directory >>>> E: 19-04-03 19:38:58 dangling 'DEALER' socket created at hal/utils/ >>>> halcmd_rtapiapp.cc:284 >>>> PocketNC.hal:10: program >>>> '/home/machinekit/machinekit-dev/configs/ARM/BeagleBone/PocketNC/ >>>> setup.bridge.sh' failed, returned 1 >>>> Shutting down and cleaning up Machinekit... >>>> Cleanup done >>>> Machinekit terminated with an error. For simple cases more information >>>> can be found in the following files: >>>> /home/machinekit/linuxcnc_debug.txt >>>> /home/machinekit/linuxcnc_print.txt >>>> >>>> >>>> For other cases get more meaningfull information by restarting after >>>> export DEBUG=5 >>>> >>>> >>>> and look at the output of: >>>> /var/log/linuxcnc.log >>>> dmesg >>>> >>>> >>>> When looking for errors, specifically look for libraries that fail to >>>> load >>>> by looking for lines with 'insmod failed' as per example below. >>>> >>>> >>>> insmod failed, returned -1: >>>> do_load_cmd: dlopen: nonexistant-component.so: cannot open shared >>>> object file: >>>> No such file or directory >>>> >>>> >>>> For getting help, please have a look here: www.machinekit.io/docs/ >>>> getting-help/ >>>> >>>> I have tried my best to figure this out using the tips in the message >>>> above, but couldn't do much. I ran this command >>>> <https://forum.linuxcnc.org/media/kunena/attachments/1315/lcnc_dependancies.txt> >>>> >>>> suggested here >>>> <https://forum.linuxcnc.org/gmoccapy/27238-gmoccapy-python-issue-gtkgl#41267> >>>> by >>>> someone called cncbasher, but didn't help with my case. Likewise, I have >>>> taken a look here >>>> <https://groups.google.com/forum/#!topic/machinekit/AjBFY6aMSeQ>and >>>> there <https://jetforme.org/2018/04/machinekit-on-bbb/>. On the >>>> latter, step 9 suggests editing something, but I have no inkling how to >>>> access that or *nano *what. This latter link seems something, can >>>> anyone please help me edit those lines? >>>> >>>> Thanks. >>>> >>>> -- >>> website: http://www.machinekit.io blog: http://blog.machinekit.io >>> github: https://github.com/machinekit >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Machinekit" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to machi...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/machinekit. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.