I've installed the stretch Machinekit image from elinux.org on a PocketBeagle to play around with. As it turns out some of the installed drivers are indeed specific to the BBB, hal_bb_gpio being one of them (it insists on mapping pin 201 to 901 and then complain that it cannot be configured). After looking at the source I understand what's going on and why this is happening - however, I don't know what else needs to get specifically built for the pocketbeagle.
So the question is: What's the best way to get Machinekit running on a PocketBeagle? Thanks a lot, Markus -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/71a54e42-2238-480d-ac6d-f2fc8fd6a431%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
