Be interesting to see more details on the Linuxcnc\USB\MESA setup. As far as I was aware there was no RT support for USB. I'm not even sure if MESA themselves recommend their USB boards for use with Linuxcnc.
On Thursday, February 18, 2021 at 7:32:57 AM UTC+11 doug....@gmail.com wrote: > Great, thanks for finding it! > > I've seen lots of people purchasing 3DP controller boards to upgrade > 3DP/Lasers/CNC's(consumer stuff) and many of them also use an rPi with > OctoPrint or CNCjs, GridBot etc. > I like this approach in that all of my macines(4 3DPs, 2 laser cutters and > 1 CNC) all have consumer grade controllers in them running on different > uCPUs. Some AVR328, STM32, LPC17xx and one a BBB/CRAMPS. > But would love to be able to have LinuxCNC/Machinekit on an rPi doing the > control, UI, setup. > > On Wednesday, February 17, 2021 at 11:02:18 AM UTC-8 ce...@tuta.io wrote: > >> Hi, >> the code is available in https://github.com/scottalford75/Remora - looks >> like he though that spiPRU is not a great name and changed it to something >> more flashy. >> >> Looks interesting from programming point of view, but I wonder how many >> people would buy Smoothieboard and RPi both to run 3D printer with LinuxCNC >> on it? Most will stay with Smoothie, I think. >> >> Cern. >> >> Dne úterý 16. února 2021 v 19:18:20 UTC+1 uživatel doug....@gmail.com >> napsal: >> >>> I was about to start on setting up a Xylotex BareBoneCNC with a >>> BBB/Machinekit and thought I'd look at what's going on with Raspberry Pi in >>> CNC world. I found a video of a guy driving a Mesa board over USB with >>> LinuxCNC and it looked impressive(doesn't take much). >>> >>> Got to wondering if a standard 3DP controller like SKR, Smoothieboard, >>> etc couldn't run firmware similar to the MESA board and only found mention >>> of this spiPRU but no details, code, anything. >>> >>> https://github.com/scottalford75/LinuxCNC-on-RPi >>> >>> I searched for spiPRU here and in general inter-web lands and found >>> nothing but the mention of it in the above git repo. If anyone knew about >>> it I figured they would be here. >>> Thx >>> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/cc241b97-47bb-48d0-b3b4-e595dc809b55n%40googlegroups.com.
