It might be necessary for folks to contact FS tech support individually. I just did this.
Teresa "On the other hand, there are different fingers." On Mar 30, 2012, at 11:03 AM, Teresa Cochran wrote: > Unfortunately, a username and password is required to access the files. > > Teresa > > "On the other hand, there are different fingers." > > On Mar 30, 2012, at 3:39 AM, M. Taylor wrote: > >> Thank you, Scott. >> >> Mark >> >> From: macvisionaries@googlegroups.com >> [mailto:macvisionaries@googlegroups.com] On Behalf Of Scott Erichsen >> Sent: Friday, March 30, 2012 12:38 AM >> To: macvisionaries@googlegroups.com >> Subject: Focus40Blue Firmware update 4.57 >> >> Downloadable Focus 40 Blue Update >> >> This firmware update for the Focus 40 Blue addresses an issue which arose >> after a recent release of Apple’s OSX operating system that affects Braille >> output >> from an Apple computer over USB. >> >> How to Download and Install the Update >> >> Note: Windows is required to update the firmware. The updater will not work >> on Mac. >> >> 1. Download the FS Braille Display Firmware Update application to a >> Microsoft Windows computer using the following link: >> >> ftp://ftp.freedomscientific.com/users/hj/private/WebFiles/Focus40Blue/FS-Braille-Display-Firmware-Update-457.exe >> >> 2. When the File Download dialog box opens, choose Save. When the Save As >> dialog box opens, save the FS Braille Display Firmware Update 457.exe file on >> the Desktop, which is the Windows default. >> >> 3. Launch the firmware updater application FS Braille Display Firmware >> Update 457.exe to update the firmware in your display to version 4.57. >> >> 4. A dialog box opens displaying the current firmware version of the Focus >> 40 Blue. Choose Update Firmware to proceed with the firmware update, or >> choose >> Exit to close the application without performing the update. >> >> 5. After choosing the Update Firmware button, the application will warn you >> to not unplug the Braille display during the update. When you are ready, >> choose >> Start Download to begin updating the firmware. You will receive the message >> “Download Done” when the update is complete. >> >> 6. If you are using JAWS or another screen reader, close and restart the >> software before using your Focus 40 Blue. >> >> Note: If a failure occurs during the update process, do not disconnect the >> display from the computer. Close the updater application, then relaunch it >> and >> start the update again. >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to macvisionaries@googlegroups.com. >> To unsubscribe from this group, send email to >> macvisionaries+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To post to this group, send email to macvisionaries@googlegroups.com. >> To unsubscribe from this group, send email to >> macvisionaries+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/macvisionaries?hl=en. > -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to macvisionaries@googlegroups.com. To unsubscribe from this group, send email to macvisionaries+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.