2009/11/16 Quim Gil <quim.gil at nokia.com>
>I'm not even a Windows/Mac user so (as shameful as it is) I reckon
>having no clue now about how these users are supposed to flash their
>devices. Can I beg some (urgent) help from the Nokians and community
>writers related to the pages linked above? It will save us many
>questions in lists and forums.
As a very much multi-platform user, I can verify that the command-line
flasher-3.5 works on Windows and Mac exactly like it does on Linux. So no
differences there.
I haven't tried using the Mac GUI (770Flasher), but I'd recommend against using
it, especially for the Maemo Summit participants, who are expected to flash not
just the firmware binary file, but also the additional and separate eMMC binary
file.
Quick guide is:
Linux/Mac:
sudo ./flasher-3.5 -f -F firmware_image.bin
sudo ./flasher-3.5 -f -F -R emmc_image.bin
(the order is important)
Windows:
flasher-3.5.exe -f -F firmware_image.bin
flasher-3.5.exe -f -F -R emmc_image.bin
(the order is important)
Notes:
1) make sure the device is turned off before starting
2) run the flasher command (as above) first, it will start and wait for USB
connection
3) plug in the USB cable to the device and the computer
4) the flashing process should start automatically
5) on some computers the device never goes automatically to "firmware update"
mode when USB is plugged in and flasher is running.
6) If you are having problems with (5), then you need to force the firmware
update mode by doing (1), (2), and before (3) press and hold "u" key in the
device HW keyboard, then do (3).
...
The (6) is also in the flasher-3.5 documentation.
BR,
Mox
_______________________________________________
maemo-community mailing list
[email protected]
https://lists.maemo.org/mailman/listinfo/maemo-community
