2009/11/19 Andrea Borgia <[email protected]>: > [email protected] ha scritto: > >> Linux/Mac: >> sudo ./flasher-3.5 -f -F firmware_image.bin >> sudo ./flasher-3.5 -f -F -R emmc_image.bin >> (the order is important) >> >> Windows: >> flasher-3.5.exe -f -F firmware_image.bin >> flasher-3.5.exe -f -F -R emmc_image.bin >> (the order is important) > > A quick note on the order issue: I followed the wiki page at > http://wiki.maemo.org/Updating_the_tablet_firmware, with a different > sequence of parameters (-F -f -R), and had no problems. > > Andrea
-R stands for reboot (the device) after flash. AFAIK you can't directly flash the eMMC image. When the device starts it expects the fiasco image, then it expects the emmc one. But I might be wrong. It worked for you :) -- anidel Sent from London, Eng, United Kingdom _______________________________________________ maemo-community mailing list [email protected] https://lists.maemo.org/mailman/listinfo/maemo-community
