2009/11/19 <[email protected]>: >> -----Original Message----- >> From: [email protected] [mailto:maemo-community- >> [email protected]] On Behalf Of ext Andre Klapper >> Sent: 19 November, 2009 13:39 >> To: [email protected] >> Subject: Re: [maemo-community] URGENT! Updating the info for flashing >> >> Am Donnerstag, den 19.11.2009, 11:19 +0000 schrieb Aniello Del Sorbo: >> > I tried to flash my device to 42-11 from 41-10 a few days ago and I >> > followed these very steps. >> > It flashed the firmware (note: no -R option passed here to flasher), >> > but when I ran the second >> > flasher for the eMMC image it didn't work. >> > It stated something like device busy. > > Blame the computer USB. For a common standard technology, USB implementations > vary a lot. >
I will... :) >> I'm somehow surprised to always read on this list to first flash the >> firmware and then the eMMC image. So far on the N900 I have always >> first >> flashed the eMMC image and then the firmware, without problems. :-) > > It really doesn't matter. Trust me, I have done enough flashing. > And technically no absolute need to reboot between firmware and emmc either. > Reboot just makes extra sure everything is in order. That's the point with > the instructions, they are mean to make sure everything moves on the safest > path. > > Tero > Well the latest ones here from Mox doesn't make you reboot and explicitly says the order is important. Go figure. -- anidel Sent from London, Eng, United Kingdom _______________________________________________ maemo-community mailing list [email protected] https://lists.maemo.org/mailman/listinfo/maemo-community
