Hello, Juan, Thanks to you I found the "preferred port" options under Options. It worked.
There's something unusual about the ports menu. I see about 6 possible ports, some input and some output. When I go to the "preferred ports" option, I only see two or three ports. I don't know what to make of that. As said, it's a MIDISPORT, so perhaps all this will make sense to some of you. Again I thank you for your aid. Joe Giovanelli I understand that I should be able to create a track using control-ins. No track is created. I find, however, that if I go to the Tracks menu I can create a new track by pressing I. Why can't I get the control-ins to work? I cannot turn off "local." I go to the MIDI menu and press L but nothing happens. I made a track and selected an instrument other than Piano, the default on my PX-350. Even though I couldn't tur Local off, I made a test recording and it played properly. I heard just the instrumented I selected for the track. ----- Original Message ----- From: Juan Bello <[email protected]> To: "QWS list" <[email protected]> Date: Tuesday, May 5, 2015 19:34 Subject: Re: QWS List a few questions please > > > hi, under the qws options there is a prefferred midi port selection > list. Make sure the keyboard is connected before selecting the port > and also before starting qws. You can also always go to the options > menú and under ports check and uncheck the ports qws should use. > > 2015-05-05 18:04 GMT-05:00, Joe Giovanelli <[email protected]>: > > Hello, Everybody, > > > > For many reasons I have not done any MIDI sequencing for more than ten > > years. I've forgotten many thing, but I tried reading the QWS instructions > > before writing you. > > > > Just in case it helps, I'm using a MIDISPORT and a Casio PX-350. The > > computer runs Windows 7. > > > > 1. I set the desired port from the menu, but when I load a sequence, all > > tracks use the Microsoft GS Wave Table. I had to go to each tracks and > > assign the proper ports. I guess it comes down to how to make those ports as > > the defaults for any sequence I load? > > > > I suppose I could ask other questions but this is my main difficulty as I > > begin MIDI work. > > > > I thank you for any ideas here. > > > > Joe Giovanelli > > To unsubscribe or change list options, see http://lists.andrelouis.com > > > > for archived list posts, see http://www.mail-archive.com/[email protected] > > > > > > Juan Pablo Bello > Cel. 313-879-2884 > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
