About control+insert, well, I think I can help. Insert is a command key for Jaws and NVDA! You can use insert+3 for pass key through on Jaws or insert+f2 to do it on NVDA. But a quick way is, in the empty track list, press applications and enter!
HTH! André! 2015-05-06 22:03 GMT-03:00, Joe Giovanelli <[email protected]>: > Hello, Juan, > > Thanks to you I found the "preferred port" options under Options. It > worked. > > There's something unusual about the ports menu. I see about 6 possible > ports, some input and some output. When I go to the "preferred ports" > option, I only see two or three ports. I don't know what to make of that. As > said, it's a MIDISPORT, so perhaps all this will make sense to some of you. > > Again I thank you for your aid. > > Joe Giovanelli > > I understand that I should be able to create a track using control-ins. No > track is created. I find, however, that if I go to the Tracks menu I can > create a new track by pressing I. Why can't I get the control-ins to work? > > I cannot turn off "local." I go to the MIDI menu and press L but nothing > happens. > > I made a track and selected an instrument other than Piano, the default on > my PX-350. Even though I couldn't tur Local off, I made a test recording and > it played properly. I heard just the instrumented I selected for the track. > > > > ----- Original Message ----- > From: Juan Bello <[email protected]> > To: "QWS list" <[email protected]> > Date: Tuesday, May 5, 2015 19:34 > Subject: Re: QWS List a few questions please > >> >> >> hi, under the qws options there is a prefferred midi port selection >> list. Make sure the keyboard is connected before selecting the port >> and also before starting qws. You can also always go to the options >> menú and under ports check and uncheck the ports qws should use. >> >> 2015-05-05 18:04 GMT-05:00, Joe Giovanelli <[email protected]>: >> > Hello, Everybody, >> > >> > For many reasons I have not done any MIDI sequencing for more than ten >> > years. I've forgotten many thing, but I tried reading the QWS >> > instructions >> > before writing you. >> > >> > Just in case it helps, I'm using a MIDISPORT and a Casio PX-350. The >> > computer runs Windows 7. >> > >> > 1. I set the desired port from the menu, but when I load a sequence, >> > all >> > tracks use the Microsoft GS Wave Table. I had to go to each tracks and >> > assign the proper ports. I guess it comes down to how to make those >> > ports as >> > the defaults for any sequence I load? >> > >> > I suppose I could ask other questions but this is my main difficulty as >> > I >> > begin MIDI work. >> > >> > I thank you for any ideas here. >> > >> > Joe Giovanelli >> > To unsubscribe or change list options, see http://lists.andrelouis.com >> > >> > for archived list posts, see >> > http://www.mail-archive.com/[email protected] >> > >> >> >> -- >> Juan Pablo Bello >> Cel. 313-879-2884 >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see >> http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
