shp2img creates an empty blank image with a mapfile like this: MAP NAME "map" WEB METADATA "wms_title" "WMS mapserver" "wms_srs" "EPSG:4326 EPSG:3021 EPSG:9999 EPSG:3006 EPSG:900913" "wms_extent" "1225000 6130000 1910000 7675000" "wms_enable_request" "*" "wfs_enable_request" "*" END END
PROJECTION "init=epsg:4326" END EXTENT 15 60 30 68 SIZE 200 200 LAYER NAME "sat" DATA "/data/temp/Jesper/sat.tif" TYPE RASTER STATUS DEFAULT METADATA "wms_title" "sat" END END The output from shp2img looks like this: $ shp2img -m ttt.map -o /data/temp/Jesper/ttt.png -all_debug 5 msLoadMap(): 0.003s msDrawMap(): rendering using outputformat named png (AGG/PNG). msDrawRasterLayerLow(sat): entering. msDrawRasterLayerGDAL(): Entering transform. msDrawRasterLayerGDAL(): src=15,10645,15,15, dst=0,0,200,200 msDrawRasterLayerGDAL(): source raster PL (14.962,10645.462) for dst PL (0,0). msDrawRasterLayerGDAL(): red,green,blue,alpha bands = 1,2,3,4 msDrawMap(): Layer 0 (sat), 0.011s msDrawMap(): Drawing Label Cache, 0.000s msDrawMap() total time: 0.011s msSaveImage(/data/temp/Jesper/ttt.png) total time: 0.003s msFreeMap(): freeing map at 0x1d14f50. freeLayer(): freeing layer at 0x1d1d080. freeLayer(): freeing layer at 0x1d1e1b0. shp2img total time: 0.017s If I add: PROJECTION "init=epsg:4326" END EXTENT 17.0473154408269387 62.1606759790530177 27.5792082876237146 66.7744046276809797 shp2img outputs: msLoadMap(): 0.003s msDrawMap(): rendering using outputformat named png (AGG/PNG). msDrawRasterLayerLow(sat): entering. msDrawRasterLayerGDAL(): Entering transform. msDrawRasterLayerGDAL(): src=0,0,10474,10717, dst=27,63,140,61 msDrawRasterLayerGDAL(): source raster PL (-49.554,-33.774) for dst PL (27,63). msDrawRasterLayerGDAL(): red,green,blue,alpha bands = 1,2,3,4 msDrawMap(): Layer 0 (sat), 0.025s msDrawMap(): Drawing Label Cache, 0.000s msDrawMap() total time: 0.025s msSaveImage(/data/temp/Jesper/ttt.png) total time: 0.004s msFreeMap(): freeing map at 0x2453f50. freeLayer(): freeing layer at 0x245c080. freeLayer(): freeing layer at 0x245d430. shp2img total time: 0.033s Then the image is shown in ttt.png but is not in the correct place and not rotated correctly. Any help or ideas are appreciated! Thanks Jesper Den ons 2 sep. 2020 kl 18:23 skrev Jeff McKenna < jmcke...@gatewaygeomatics.com>: > I'm curious what happens when you try to generate a map image from the > commandline: shp2img -m test.map -o ttt.png -all_debug 5 > > -jeff > > > > -- > Jeff McKenna > MapServer Consulting and Training Services > co-founder of FOSS4G > http://gatewaygeo.com/ > > > > On 2020-09-02 4:51 a.m., Jesper Kempe wrote: > > Hi > > > > This is the mapfile: > > > > MAP > > NAME "map" > > WEB > > METADATA > > "wms_title" "WMS mapserver" > > "wms_srs" "EPSG:4326 EPSG:3021 EPSG:9999 > > EPSG:3006 EPSG:900913" > > "wms_extent" "1225000 6130000 1910000 7675000" > > "wms_enable_request" "*" > > "wfs_enable_request" "*" > > END > > END > > > > PROJECTION > > "init=epsg:4326" > > END > > > > EXTENT -180 -90 180 90 > > > > LAYER > > NAME "sat" > > DATA "sat.tif" > > TYPE RASTER > > STATUS ON > > > > METADATA > > "wms_title" "sat" > > END > > > > PROJECTION > > "init=epsg:4326" > > END > > EXTENT 17.0473154408269387 62.1606759790530177 > > 27.5792082876237146 66.7744046276809797 > > > > END > > > > END > > > > I have also tried both without PROJECTION in LAYER and with > > PROJECTION > > AUTO > > END > > > > None of them works. > > > > EXTENT in the mapfile is taken from Qgis metadata of the layer. > > > > > > Thanks > > Jesper > > > > Den tis 1 sep. 2020 kl 23:41 skrev Steve Lime <sdl...@gmail.com > > <mailto:sdl...@gmail.com>>: > > > > What does the mapfile look like? > > > > On Tue, Sep 1, 2020 at 10:26 AM Jesper Kempe <jesper.ke...@gmail.com > > <mailto:jesper.ke...@gmail.com>> wrote: > > > > Hi > > > > I have a GeoTiff file that gdalinfo presents like this: > > > > gdalinfo sat.tif > > Driver: GTiff/GeoTIFF > > Files: sat.tif > > Size is 10474, 10717 > > Coordinate System is `' > > GCP Projection = > > GEOGCS["WGS 84", > > DATUM["WGS_1984", > > SPHEROID["WGS 84",6378137,298.257223563, > > AUTHORITY["EPSG","7030"]], > > AUTHORITY["EPSG","6326"]], > > PRIMEM["Greenwich",0], > > UNIT["degree",0.0174532925199433], > > AUTHORITY["EPSG","4326"]] > > GCP[ 0]: Id=1, Info= > > (0,0) -> > > (27.5783052509812,65.9184735836942,229.992792810313) > > GCP[ 1]: Id=2, Info= > > (524,0) -> > > (27.1416007200269,65.9731480840222,172.994255514815) > > GCP[ 2]: Id=3, Info= > > (1048,0) -> > > (26.7005564512604,66.0268770755367,152.994545626454) > > GCP[ 3]: Id=4, Info= > > (1572,0) -> > > (26.257537545879,66.0793551447287,131.994995356537) > > GCP[ 4]: Id=5, Info= > > (2096,0) -> > > (25.8102107755995,66.1308402121171,163.993212723173) > > .... > > > > with 482 GCPs. > > > > > > The file opens ok in Qgis and is located in the right location. > > But I canĀ“t in any way get it to show correctly in Mapserver. > > > > Is this possible to do? Or do I have to gdalwarp the file to a > > known projection and set the PROJECTION of the layer? > > > > Thanks > > Jesper > > > > > > > > _______________________________________________ > mapserver-users mailing list > mapserver-users@lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/mapserver-users
_______________________________________________ mapserver-users mailing list mapserver-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users