You'll need to set up an index to all those PNG/PGW files. I've done this with a SHP file in the past as Sven described. There is more than on way to do this though.
Let me know if you need a MapServer example, I can dig one out for you. Bobb My machine - - - PW19-S295-C024 > > > -----Original Message----- > > > From: Stefan Gofferje <li...@home.gofferje.net> > > > Sent: Wednesday, October 12, 2022 10:53 AM > > > To: Basques, Bob (CI-StPaul) <bob.basq...@ci.stpaul.mn.us>; > > > mapserver-users@lists.osgeo.org > > > Subject: Re: [MapServer-users] "Emergency" map server on Raspberry Pi > > > - raster/PNG source in folder structure > > > > > > Think Before You Click: This email originated outside our organization. > > > > > > > > > Hi, > > > > > > On 10/12/22 17:35, Basques, Bob (CI-StPaul) wrote: > > > > This might help you get started: > > > > > > > > https://github.com/klassenjs/rpi- > > > workshop/blob/master/Workshop.org > > > > > > > > We've got 7 of these used in the filed now as standalone Webservers, > > > with Wifi access. No internet required. You just turn it on. You can > > > add > > > in a Battery and/or connect directly to a 12v power source like the > > > ignition switch for power from a vehicle, and it's always on. > > > > > > > > Real low power and depending on how big a card you use, a lot of data. > > > Our survey version has over 250k geolocated document scans available. > > > > > > > > This is a map based system, but it a whole Server Stack configuration, > > > so should give you a good head start. > > > > > > > > We ran this as a workshop at a OSGeo conference a few years back. > > > > > > Cool! Not very much detail about mapserver, though. I'm planning to > > > throw my stuff to Github too, once I got a little further. I'm a little > > > bit > > > more on the complicated side with 4G/5G and potential other IP over > > > radio being in the mix. Also looking at batman-adv for meshing and > > > testing some ideas for voice/radio over IP. I found a very nice CM4 > > > baseboard which is tiny and still has space for an 42mm NVME SSD, so > > > atm I'm planning for 256G storage in addition to the EMMC. > > > > > > -S > > > > > > -- > > > (o_ Stefan Gofferje | SCLT, MCP, CCSA > > > //\ Reg'd Linux User #247167 | VCP #2263 > > > V_/_ https://www.gofferje.net | https://www.saakeskus.fi _______________________________________________ MapServer-users mailing list MapServer-users@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users