Hi You may add these two lines:
fig = plt.figure() fig.clear() It should give what you want to see. Gökhan On Wed, May 6, 2009 at 6:09 PM, Christopher Barker <chris.bar...@noaa.gov> wrote: > Hi all > > I'm sure this is documented somewhere, but I can't find it. > > I'm finally getting around to learning ipython, which is pathetic as it > sure seems like a great tool. > > Anyway, I want to be able to have a simple script that does some > plotting with MPL, and run it with python's "run". Then change the > script and run again, and have the plot updated -- this does not seem to > happen. It appears to work if I close th figure by clicking on the > Window close button, then "run", but that's kind of a pain. > > What am I missing? > > example script: > > > import matplotlib.pyplot as plt > import numpy as np > > x = (1,2,3,4,5,6,7,8) > y = (6,2,6,4,6,4,7,5) > > plt.plot(x, y) > plt.grid('on') > plt.show() > > > the I want to be able to do: > > > In [32]: run test_ipython.py > > get a plot, then change some of the numbers in the script and: > > In [33]: run test_ipython.py > > then get an updated plot. > > It's not doing that now. > > > what am I missing? > > thanks, > -Chris > > > > > > > -- > Christopher Barker, Ph.D. > Oceanographer > > Emergency Response Division > NOAA/NOS/OR&R (206) 526-6959 voice > 7600 Sand Point Way NE (206) 526-6329 fax > Seattle, WA 98115 (206) 526-6317 main reception > > chris.bar...@noaa.gov > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Matplotlib-users mailing list > Matplotlib-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/matplotlib-users > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Matplotlib-users mailing list Matplotlib-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/matplotlib-users