hi
you shold read document MATPOWER
but so
Are you Mathpower add path to the Matlab?!if yes?! So!
frist you shold chose the case . for example case 9 that means it has 9bus
In command window typeing
mpc=loadcase('case9');
Results = runpf(mpc);
It was simple isn't it?!
On Fri, Feb 1, 2019, 19:07 Ray Zimmerman <[email protected] wrote:
> If you have islands, each island must have it’s own slack bus.
>
> Ray
>
>
> On Jan 27, 2019, at 1:12 AM, Aamir Nawaz <[email protected]> wrote:
>
> Dear Dr. Ray,
> Thanks for your kind response. I am still unable to understand how to
> execute opf or pf for distribution system while adding some DGs on other
> feeders than slack bus. Please share some example where DGs connected
> within the distribution system is supplying power to load, particularly in
> case of islanding. I hope you understood my problem and help me solve this.
> Thanks again.
>
>
>
> *Regards,Aamir Nawaz*
> On Friday, January 11, 2019, 6:49:00 AM GMT+8, Ray Zimmerman <
> [email protected]> wrote:
>
>
> If you are running an OPF, it will take the least expensive generation it
> can. Maybe check the relative costs?
>
> Ray
>
> On Jan 3, 2019, at 10:46 PM, Aamir Nawaz <[email protected]> wrote:
>
> Dear Dr. Ray,
> I want to execute IEEE 13 bus distribution system with distributed
> generations (DG, wind farm, pv etc). I have added generators but it always
> take power from generator at slack bus but not others. Please guide me how
> to add DG in distribution system at different nodes.
>
>
>
> *Regards,Aamir Nawaz.*
> <case13bw.m>
>
>
>
>
