Dear Ray, Thank you very much for the quick answer! Unfortunately, I tried what you suggested but I get the following error message:
Error using apply_changes (line 190) apply_changes: unsupported modification type 1 for gencost table CT_MODCOST_F/X modification It may be that some other field needs to be set in addition to 'table' and 'col'? Diego El lun, 25 abr 2022 a las 14:02, Ray Daniel Zimmerman (<r...@cornell.edu>) escribió: > Hi Diego, > > You should be able to do it just like any other profile (e.g. see > ex_wind_profile.m and ex_load_profile.m), except you would set the 'table' > field to CT_TGENCOST and the 'col' field to either CT_MODCOST_F or > CT_MODCOST_X. See Section 9.3.5 in the MATPOWER User’s Manual > <https://matpower.org/docs/MATPOWER-manual-7.1.pdf> for more details > about the types of modifications that can be made by apply_changes() and > therefore by a MOST profile. > > Hope this helps, > > Ray > > > On Apr 25, 2022, at 9:09 AM, Diego Feroldi <dfero...@gmail.com> wrote: > > Hi everyone, > > I am trying to incorporate a time-varying energy cost profile (gencost) into > an economic dispatch problem. I can't find the way to enter the profile into > the MOST problem. Could someone give me some idea or let me know if it is not > possible? Thanks in advance for any feedback, > > > Best regards, > > > Diego > > -- > Diego Feroldi > > > -- Diego Feroldi
