> This does not seem like the NetBSD hybrid ISO -- usually because of the > partition zero fragment you canNOT list its directory. Where did you > get the image? Did you build this yourself? And did you burn it properly > in Toast? If you did this right, Toast should see the NetBSD macppccd.iso > image as hybrid HFS/ISO 9660.
I got the image off of the netbsd.org iso server and then burned it using Apple's Disk Burn. I selected ISO 96xxx (MP3 Format) and then mounted the image and copied the stuff over. In the file->get info window, it says the CD is ISO... I have no idea what I'm really doing.... Any help is really needed and appreciated. > Putting this aside, assuming this is the hybrid ISO, a full boot path > should not be necessary. On my 7300 (CD ID#2, on the 5MB/s bus), the CD > boot path was > > boot scsi/[EMAIL PROTECTED]:0 NETBSD.MACPPC Here's what I did and what I got back: 0 > setenv boot-file NETBSD.MACPPC ok 0 > setenv boot-device scsi/[EMAIL PROTECTED]:0 ok 0 > boot RESETing SCSI bus (CD ROM's busy light flashes on and off) RESETing SCSI bus RESETing SCSI bus can't LOAD from this device ok 0 > Typing "words scsi/[EMAIL PROTECTED]:0" gives me many options, so I know that the device is supported. Any ideas? Thanks so much! Patrick > > I've being trying to get NetBSD to boot on my PM 6400. I have the serial > > console working, I burned an ISO CD with the proper image, and played > > with the open firmware. Here's what happens: > > > > 0 > boot scsi/[EMAIL PROTECTED]:0,\OFWBOOT.XCF > > MACPCC/BINARY/KERNEL/NETBSD_GENERIC_MD.GZ > > RESETing SCSI bus > > RESETing SCSI bus > > RESETing SCSI bus > > can't LOAD from this device > > ok > > 0 > > > > > I tried "dir / ls scsi/[EMAIL PROTECTED],0\" and it worked, so at least it sees > > the CD. -- MaX-list is sponsored by <http://lowendmac.com/> and... / Buy books, CDs, videos, and more from Amazon.com \ / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \ Support Low End Mac <http://lowendmac.com/lists/support.html> MaX-list info: <http://lowendmac.com/linux/max.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/max-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
