Replying to a message
By: Andy Thomson <[EMAIL PROTECTED]>
On: 19-Aug-01 17:42:53
Re: [md-2] MD2 & V3.3.104 unstable
On 19-Aug-01, you wrote:
>
> I have been monitoring crashes of my 1200 with Zoro-IV and mediator
> recently. It seems that it does not matter if I use Genesis or MiamiDx
> if I do anything like start V with MD2 and load a page in V there is a
> good chance things will freeze and I need to restart the machine. If V
> is open but I wait until MD2 has finished downloading news and mail
> things are usually fine. On the occasion when I do get a message, it is
> Micodots TCP task has stopped responding. Do these point to a hardware
> problem or is it just the fact that V and MD2 1.4.15 are beta? AmChat
> and NetInfo do not seem to cause problem.
>
> PS. I am using the internal serial port with a Pace Solo modem. My
> workbench display is 1024x768 24bit on a Voodoo3 card.
>
There is a thread on the Yahoo OS 39 list, I haven't read yet on
netconnect and OS 3.9. Are you using netconnect or the stand alone
versions like I do? I can run V 2.3 and MDII w.4.15 without problems,
but V 104 beta locks up on me eventually every time I use it, even if
only it and Genesis or it and Miami are all that is running. Others
have reported just the opposite, however.
Regards
--
Mike Leavitt [EMAIL PROTECTED] + team Amiga +
__________________________________________________________________
MicroDot-II Mailing List - http://www.vapor.com/md2/
MicroDot-II FAQ: http://faq.vapor.com/md2/
Listserver Help: mailto:[EMAIL PROTECTED]?Subject=HELP
Unsubscribe....: mailto:[EMAIL PROTECTED]?Subject=UNSUBSCRIBE
