>
> Replying to a message
>
> By: Andy Thomson <[EMAIL PROTECTED]>
> On: 19-Aug-01 17:42:53
> Re: [md-2] MD2 & V3.3.104 unstable
>
>
> On 19-Aug-01, you wrote:
>
> >
> > I have been monitoring crashes of my 1200 with Zoro-IV and mediator
> > recently. It seems that it does not matter if I use Genesis or MiamiDx
> > if I do anything like start V with MD2 and load a page in V there is a
> > good chance things will freeze and I need to restart the machine. If V
> > is open but I wait until MD2 has finished downloading news and mail
> > things are usually fine. On the occasion when I do get a message, it is
> > Micodots TCP task has stopped responding. Do these point to a hardware
> > problem or is it just the fact that V and MD2 1.4.15 are beta? AmChat
> > and NetInfo do not seem to cause problem.
> >
> > PS. I am using the internal serial port with a Pace Solo modem. My
> > workbench display is 1024x768 24bit on a Voodoo3 card.
> >
>
> There is a thread on the Yahoo OS 39 list, I haven't read yet on
> netconnect and OS 3.9. Are you using netconnect or the stand alone
> versions like I do? I can run V 2.3 and MDII w.4.15 without problems,
> but V 104 beta locks up on me eventually every time I use it, even if
> only it and Genesis or it and Miami are all that is running. Others
> have reported just the opposite, however.
>
> Regards
> --
> Mike Leavitt [EMAIL PROTECTED] + team Amiga +
I am using OS3.0 on a A1200 with a `040 card and a mediator,
Netconnect3 and both MiamiDX demo and GenesisRA. And yes a crash
eventualy happens when MD 1.4.15 is in use and/or V 3.3.104.
--
_
High Wycombe /_\
Buckinghamshire / | \
ICQ: 74683195
__________________________________________________________________
MicroDot-II Mailing List - http://www.vapor.com/md2/
MicroDot-II FAQ: http://faq.vapor.com/md2/
Listserver Help: mailto:[EMAIL PROTECTED]?Subject=HELP
Unsubscribe....: mailto:[EMAIL PROTECTED]?Subject=UNSUBSCRIBE
