Replying to a message
By: Andy Thomson <[EMAIL PROTECTED]>
On: 26-Aug-01 01:28:06
Re: [md-2] Re: MD2 & V3.3.104 unstable
On 26-Aug-01, you wrote:
>> On 19-Aug-01, you wrote:
>>
>>
>> I have been monitoring crashes of my 1200 with Zoro-IV and mediator
>> recently. It seems that it does not matter if I use Genesis or MiamiDx
>> if I do anything like start V with MD2 and load a page in V there is a
>> good chance things will freeze and I need to restart the machine. If V
>> is open but I wait until MD2 has finished downloading news and mail
>> things are usually fine. On the occasion when I do get a message, it is
>> Micodots TCP task has stopped responding. Do these point to a hardware
>> problem or is it just the fact that V and MD2 1.4.15 are beta? AmChat
>> and NetInfo do not seem to cause problem.
>>
>> PS. I am using the internal serial port with a Pace Solo modem. My
>> workbench display is 1024x768 24bit on a Voodoo3 card.
>>
>>
>> There is a thread on the Yahoo OS 39 list, I haven't read yet on
>> netconnect and OS 3.9. Are you using netconnect or the stand alone
>> versions like I do? I can run V 2.3 and MDII w.4.15 without problems,
>> but V 104 beta locks up on me eventually every time I use it, even if
>> only it and Genesis or it and Miami are all that is running. Others
>> have reported just the opposite, however.
>
> I am using OS3.0 on a A1200 with a `040 card and a mediator,
> Netconnect3 and both MiamiDX demo and GenesisRA. And yes a crash
> eventually happens when MD 1.4.15 is in use and/or V 3.3.104.
>
Try running MDII with Miami, I only get crashes with 1.4.15 when I use it
with Genesis, for some strange reason. V 3.3.104 locks up or gurus with
either, just by itself here, but V 3.2 is pretty stable, but not as stable
as V 3.0.52 is.
Regards
--
Mike Leavitt [EMAIL PROTECTED] + team Amiga +
__________________________________________________________________
MicroDot-II Mailing List - http://www.vapor.com/md2/
MicroDot-II FAQ: http://faq.vapor.com/md2/
Listserver Help: mailto:[EMAIL PROTECTED]?Subject=HELP
Unsubscribe....: mailto:[EMAIL PROTECTED]?Subject=UNSUBSCRIBE
