Col mate I wouldn't mind to ask someone about it..... do you have an email or
phone number??
thank you again.
Wojee
Jim Jones wrote:
> Wojee
>
> In addition it is always a worthwhile effort to measure the pressure
> differences before and after the intercooler you would be surprised how
> inefficient some are with losses of upto 5psi across the core and ensure
> that your plumbing is stainless, mild steel will over time delaminate on the
> inside and go thru your motor.
>
> I believe you are in Perth, I can put you in contact with Brett who has
> completed numerous.
>
> jim
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Errol Smith
> Sent: Wednesday, 21 June 2000 7:24
> To: [EMAIL PROTECTED]
> Subject: Re: Ozdat Caps
>
> Wojee,
> I assume that you are running an FJ20 or SR 20DET @ 12Psi boost? These both
> flow approx 630 cfm of air @ 7000Rpm.
> To handle this volume of air without restriction you will need smooth 3"
> bends, with gentle radius curves. I would use 3" also after the
> intercooler.
> Cheers
> Feral Errol
>
> ----------
> From: wojee <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: Ozdat Caps
> Date: Wednesday, June 21, 2000 1:02
>
> Hello guys,
>
> A question for you turboed guys out there.... What is the nominal diameter
> for intercooler plumbing with regard to both to and from the intercooler,
> in
> a 1600; naturally :O) ??
>
> I am using a 13b intercooler, possibly water injection as supplement. If
> thats any importance?!?!?
>
> [I refer to exhaust tubing, eg. 2 inch OD( 50mm) / 45mm ID when refering to
> sizes]
>
> I have heard that smaller diameter pipe results in higher velocity of the
> air??
> However I am also aware that too small and we delve into restriction issues
> Can anyone please share their experience or experiences ( estimations, and
> pulling things out of one's ass accepted hee hee) spread light on the
> subject, as I am wanting to finalise material purchase ( read: diameter and
> length
>
> Thankyou in advance.
>
> Wojee
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
