you can make 2 bushes for the a series out of a single "joiner" peice, the
inside diameter is right but you have to mount them on a drill or similar
and "turn" them down. (a lathe would be ideal but i did mine with a bench
grinder that had a polishing wheel spindle on one side that held the piece
while i held a file or sandpaper against it. works reely well, but choose
good quality nylon fittings not some of the cheaper plastic!
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Terry
Sent: Saturday, November 18, 2000 11:11 AM
To: [EMAIL PROTECTED]
Subject: RE: gearbox shifter movement
The A series gearsticks do have the two bushes and suffer the same fate as
the L series, the 1200 has nylon. I don't know what the size is so my
solution with the hardie pope T piece may not work with these.
terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Richard Webb
Sent: Saturday, 18 November 2000 10:30 AM
To: [EMAIL PROTECTED]
Subject: Re: gearbox shifter movement
Do the A series gearsticks have nylon components? I remember clearly mine
being metal, like soft metal. Maybe someone had changed it or maybe I was
dreaming.
-----
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
