Re: Mandrel Bent Exhausts

[Davidson]

Daniel, we can supply u with bends if u need them.  We have 20,30,45,90 (few others aswell) stainless 3" bends in stock.  There not too expenisive at all i dont think.  Your going to have to get the system spot on otherwise u will scrape the crap out of it!!  I wouldnt attempt it unless i had all the equipment needed tho.  Have u done much welding? Do u have access to a hoist? Do u have a bench saw? Linisher? Stands? Another thing with mandrel systems, you never really know what degree of bend u need until your up to that point so its hard to say exactly how many bends of what kind u need. Its alot harder than press bend systems! The Walker cat is ok i guess but NO muffler? That will be damn loud i tell ya! I would put a small muffler in just to keep it down a bit.  I can understand why u would want to do it yourself, we charge around the $1100 to $1700 mark for full 3" stainless systems!! Nearly the cost of the Z18et itself!!! Hope this helps u.   Scott Davo -----Original Message----- From: Daniel Kroehn <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Thursday, 28 December, 2000 16:50 Subject: Mandrel Bent Exhausts List,   I'm looking at the possibility of making my own 3 inch mandrel bent exhaust when I drop in my Z18et.   I plan to use only a 3 inch hi flow Walker cat and no muffler.  I know that the whole exhaust is welded together rather than press bent and fitted but do I buy the pipe and get it bent myself (which seems that it would just be the same as a press bent exhaust) or can I buy pre bent 3 inch pipe sections?  Any tips on building my exhaust system?   Cheers, Daniel Kroehn Recommending DATRATS, supplying quality DATSUN performance parts www.Datrats.com.au   --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------