Adam,
Have fun using 46mm Zed Su's on a small 4 banger below
2.4 litres as they are fraught with problems. Many of our friends in the US
have tried using these carbies on L18/L20B's but very few have got good results
on the street. The problem as I read it is that the big bore design gives a bit
more up high than 38mm SU's but you lose so much low to mid range torque as
the 46mm venturis are so much bigger than the SSS manifold runners. You
could try hacking a 6 cylinder manifold to see if that does the
trick.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of adam tildesley
Sent: Friday, 27 April 2001 11:32
To: [EMAIL PROTECTED]
Subject: SU'S help
I was thinking of getting a set of 45mm SU'S on an L18SSS matched ported manifold for my L20 and someone told me that I should do the porting and matching the manifold before fitting the carbs. What exactly does this mean as I am only a beginner and dont know much about working/modifing engines.Any help would be great.Thanks.
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
