Yeah that wouldnt surprise me at all (that car personifies bang for buck). You could be right (is jelisee and auto anyway?). Also andrew how much do you think itd cost to get a fairly reasonable second hand turbo for the z18et. It is due back from rotos pretty soon and specs are as far as i know custom intercooler (u know the style im talking about using s5 cores with new end tanks etc measuring 57 x 30 x 8 or sumthing) 2 litre bottom end mtx-8 using fj20 CAS sequential ignition xf throttle body full 3 inch exhaust high flow t3 (rebuilt etc but looks tiny) ca18det injectors and unknown headwork i really wanna keep internal waste gate so im thinking t3/4 built to flow a fair few ponies. Any help is appreciated, i dont want a huge turbo that lags heaps (ill save that for my next project datto 13bt, cage etc :) startn soon) but something that will help me do a 12.5 (my aim with this car) >From: andrew smith <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: VG30 internals into VG20? >Date: Sat, 09 Jun 2001 13:40:50 +0800 > >Chris, >Someone told me that it was the 120Y that broke off the flywheel and it >tried to >make its way thru the chassis. >Andrew Smith > >FJ MAN wrote: > > > jelisee hasnt hit the track for a while as the last outing (mid season > > wednesday night) he supposably did sumthing to the transmission (sumone >told > > me he blew up the flywheel but i dont think thats right at all. Anyways >it > > also did some damage to the engine as well i think *dont quote me on >that* > > either way hes taking a break from drag racing. > > regARds chris > > > > >From: andrew smith <[EMAIL PROTECTED]> > > >Reply-To: [EMAIL PROTECTED] > > >To: [EMAIL PROTECTED] > > >Subject: Re: VG30 internals into VG20? > > >Date: Sat, 09 Jun 2001 09:59:49 +0800 > > > > > >Craig, > > >There are a couple of guy's in Perth that have used these VG20et motors >for > > >drag > > >racing.Apparently they have the same size valves as the RB30's so they > > >breath > > >pretty well standard.Jason Western has one in a bluebird that looks >dead > > >stock > > >on the outside but makes over 500hp.He uses a huge turbo with a large >gas > > >research carb with 2 b2 mixers and a large intercooler.This baby runs >low > > >11's > > >or maybe he's gone 10's this year as i haven't seen it this year.The >other > > >one > > >is in a 120Y and also runs gas research with a T04 and runs low 11's.On >the > > >VQ a > > >guy from Nissan told me that they had an e-mail stating that they have > > >never > > >replaced a VQ under warranty. > > >Andrew Smith > > > > > >C Coffey wrote: > > > > > > > My two cents worth, I've seen a VG20 single cam per bank injected in >a > > > > Leopard Coupe and a two barrel carby in a Laural, And I believe the >VQ > > > > series do come out rwd but Americanised auto only, and by the way >I'm > > >still > > > > looking for someone who has race preped one of these baby's, I also >had > > >a > > > > U11 Maxima Bluebird FWD VG20 Turbo, went surprisingly well, toasted >the > > > > clutch very quickly. > > > > Craig > > > > ----- Original Message ----- > > > > From: "andrew smith" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Saturday, June 09, 2001 1:49 AM > > > > Subject: Re: VG30 internals into VG20? > > > > > > > > > VG20et 112kw@5600/206Nm@3600 > > > > > VG20det 157kw@6800/265Nm@3600 > > > > > These figures vary a bit depending on model. > > > > > Another strange one is the VQ25de. > > > > > Andrew Smith > > > > > Terry Rudd wrote: > > > > > > > > > > > I think the VG20 only comes in twin cam form only one turbo ET >from > > >the > > > > > > factory. > > > > > > > > > > > > TR > > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of >Cameron > > >Stean > > > > > > Sent: Friday, 8 June 2001 8:30 > > > > > > To: [EMAIL PROTECTED] > > > > > > Subject: RE: VG30 internals into VG20? > > > > > > > > > > > > thanks heaps for the info....... just to clarify both, are they >the > > >VG > > > > ET's > > > > > > or DET's?? or are they both the same.. thanks again > > > > > > Cameron Stean > > > > > > > > > > > > >From: "Terry Rudd" <[EMAIL PROTECTED]> > > > > > > >Reply-To: [EMAIL PROTECTED] > > > > > > >To: <[EMAIL PROTECTED]> > > > > > > >Subject: RE: VG30 internals into VG20? > > > > > > >Date: Thu, 7 Jun 2001 23:49:07 +1000 > > > > > > > > > > > > > >VG20 bore is 78mm and stroke is 68mm > > > > > > > > > > > > > >Terry > > > > > > > > > > > > > >-----Original Message----- > > > > > > >From: [EMAIL PROTECTED] > > > > > > >[mailto:[EMAIL PROTECTED]]On Behalf Of Errol > > >Smith > > > > > > >Sent: Thursday, 7 June 2001 5:45 > > > > > > >To: [EMAIL PROTECTED] > > > > > > >Subject: RE: VG30 internals into VG20? > > > > > > > > > > > > > > > > > > > > >Cameron, > > > > > > >VG30 has 87mm bore X 83 mm stroke. VG20 I dont know. > > > > > > > > > > > > > >Cheers > > > > > > >Feral Errol > > > > > > >mailto:[EMAIL PROTECTED] > > > > > > >http://www.datrats.com.au/ > > > > > > > > > > > > > >-----Original Message----- > > > > > > >From: [EMAIL PROTECTED] > > > > > > >[mailto:[EMAIL PROTECTED]]On Behalf Of >Cameron > > >Stean > > > > > > >Sent: Thursday, June 07, 2001 4:02 PM > > > > > > >To: [EMAIL PROTECTED] > > > > > > >Subject: VG30 internals into VG20? > > > > > > > > > > > > > > > > > > > > > > > > > > > >hey all, > > > > > > > Ive been trying to find out weither the VG30 and VG20 > > >blocks > > > > are > > > > > > >the same except for the crank and rods..??.. in other words if >i > > >put > > > > VG30 > > > > > > >internals into a VG20 will it take it out to a 3L? and is the >bore > > > > > > >different?? ive been trying to find both of the engine specs >but to > > >no > > > > > > >avail... can anybody help me with this?? thanks in advance .. > > > > > > >Cameron Stean > > > > > > > > > > > > > > >_________________________________________________________________________ > > > > > > >Get Your Private, Free E-mail from MSN Hotmail at > > > > http://www.hotmail.com. > > > > > > > > > > > > > > > > > > > >_________________________________________________________________________ > > > > > > Get Your Private, Free E-mail from MSN Hotmail at > > > > http://www.hotmail.com. > > > > >_________________________________________________________________________ > > Get Your Private, Free E-mail from MSN Hotmail at >http://www.hotmail.com. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
