Thanks Malcom Cheers Feral Errol
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of maldat Sent: Wednesday, 6 February 2002 5:45 PM To: [EMAIL PROTECTED] Subject: Re: webers Done. For the people that asked they are now sent. I see the chokes were biffed and a 40mm inner tube has been fitted Malcolm E Smith wrote: > I'd like a copy thanks Malcom. > > Cheers > Feral Errol > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of maldat > Sent: Tuesday, 5 February 2002 11:13 PM > To: [EMAIL PROTECTED] > Subject: Re: webers > > I'll sort out a pic of down the suckers,then you will see,Would you like a > pic > of the carbs with the tops off,so you can see some heavy duty mods? > > Its a hoilday tomorrow,I've got half the day off,E.mail me if you want a pic > and I'll sent them at the same time tomorrow after noon(later today to be > correct). > I have no idea of what HP it was putting out last time this set up was up > and > running but it will be back with more CC's . > Webers can be changed to flow and work a hell of a lot more than you can > with > the copies like solox and Delo's. > Rememebr if you break delo's or solox's they carn't be welded.Webers > can,that > means you can change the way they work. > I can say you need more than a Porsche to catch me. > > You'll See > When you take guys for a drive and they own big V8's and they say your > little > Jappa is fast and No I dont want a drag,your on to something.... > Malcolm > > Richard Clough wrote: > > > Twin 40's properly choked and jetted are great for the road but twin 45's > > will be necessary for 180HP from an L20B. > > ----- Original Message ----- > > From: "Justin Friedrichs" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, 1 February 2002 12:15 PM > > Subject: webers > > > > > > > > Listers > > > What are the limitations of the twin 40mm webers?, like what would > > > be the max horse power available when used on a worked L20, with > oversize > > > pistons and goes quite hard with a DGV. > > > Would twin 45's be overkill ? for say 180- 200Hp flywheel?? > > > > > > > > > Justin > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
