RE: lOOKING FOR 240 k FRONT END

Rowe, Adam Sun, 17 Feb 2002 16:19:31 -0800

Title: RE: lOOKING FOR 240 k FRONT END

If the 7/8" has too much travel then why would the 13/16 have less?

-----Original Message-----
From:   Andrew Greenbury [SMTP:[EMAIL PROTECTED]]
Sent:   18/02/2002 9:38
To:     [EMAIL PROTECTED]
Subject:        RE: lOOKING FOR 240 k FRONT END

Hi Terry,

Ahh this sounds familiar to me, as I have 240K with twin spots and
rear drums, with 180b i think booster and 7/8 cylinder, and I have
been quietly wondering why everyone goes on about how good
240K brakes are :)

I think I will try and score a sunny master cylinder...

Thanks again
Andrew

> Leighton,
>
> I and most others with 200b or 240K Fronts and drums or R31 on the
> rear have had nothing but grief with the combination of a 7/8"
> cylinder and Kiki Bendix 180B/210/310 booster. You either throw the
> booster or change the cylinder for a 13/16" Sunny unit. The 7/8"
> has to much travel for that combo. It does depend on what callipers
> you use, Sumo 2 spots are better and 4 spot cruiser callipers are
> good but the single spots have a problem.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton
> Sent: Saturday, 16 February 2002 8:02 PM
> To: [EMAIL PROTECTED]
> Subject: Re: lOOKING FOR 240 k FRONT END
>
>
> what abouit with a 240k front end with a 7/8" master cylinder and 120y/180b
> booster
>
>
> Leighton
> ----- Original Message -----
> From: "Terry Rudd" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, February 16, 2002 1:01 PM
> Subject: RE: lOOKING FOR 240 k FRONT END
>
>
> > Leighton,
> >
> > Pass on the 240K legs, there was a 240K (blue) at Dunkers a couple of
> weeks
> > back that was complete but the way stuff gets shifted there it's highly
> > unlikely to be there - it had a full set of QI lights too.
> >
> > On R31 rears, some combos work well with just the inbuilt proportioning in
> > the master cyl. 200B/R31 with 13/16 Sunny cylinder is one, although you
> need
> > fairly similar range pads for it to work well.
> >
> > regards
> > Terry
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton
> > Sent: Thursday, 14 February 2002 5:57 PM
> > To: [EMAIL PROTECTED]
> > Subject: lOOKING FOR 240 k FRONT END
> >
> >
> > I know its a long shot but if any one has got a 240K front end they wanna
> > get rid off could you please let me know???? i am looking for one
> >
> >
> > alos im going to put the R31 skyline disc brakes on the rear end of my
> > 1600 - to get them to work properly do i need a proportion valve or will
> > they work without one???
> >
> >
> > thanx
> >
> > Leighton
> >
> >
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

RE: lOOKING FOR 240 k FRONT END

Reply via email to