----- Original Message -----
Sent: Monday, February 18, 2002 11:15
AM
Subject: RE: lOOKING FOR 240 k FRONT
END
If the 7/8" has too much travel then
why would the 13/16 have less?
-----Original Message-----
From: Andrew Greenbury [SMTP:[EMAIL PROTECTED]]
Sent: 18/02/2002 9:38
To: [EMAIL PROTECTED]
Subject: RE: lOOKING FOR 240 k FRONT END
Hi Terry,
Ahh this sounds familiar to me, as I have 240K
with twin spots and
rear drums, with 180b
i think booster and 7/8 cylinder, and I have
been quietly wondering why everyone goes on about how good
240K brakes are :)
I think I will try and score a sunny master
cylinder...
Thanks again
Andrew
> Leighton,
>
> I and most others with
200b or 240K Fronts and drums or R31 on the
> rear have had nothing but grief with the combination of a
7/8"
> cylinder and Kiki Bendix
180B/210/310 booster. You either throw the
> booster or change the cylinder for a 13/16" Sunny unit. The
7/8"
> has to much travel for that
combo. It does depend on what callipers
> you use, Sumo 2 spots are better and 4 spot cruiser callipers
are
> good but the single spots have a
problem.
>
> regards
> Terry
>
>
-----Original Message-----
> From:
[EMAIL PROTECTED]
>
[mailto:[EMAIL PROTECTED]]On
Behalf Of Leighton
> Sent: Saturday,
16 February 2002 8:02 PM
> To:
[EMAIL PROTECTED]
>
Subject: Re: lOOKING FOR 240 k FRONT END
>
>
> what abouit with a 240k front end with a 7/8" master
cylinder and 120y/180b
>
booster
>
>
> Leighton
> ----- Original Message -----
> From: "Terry Rudd"
<[EMAIL PROTECTED]>
> To:
<[EMAIL PROTECTED]>
> Sent: Saturday, February 16, 2002 1:01 PM
> Subject: RE: lOOKING FOR 240 k FRONT END
>
>
> > Leighton,
> >
> >
Pass on the 240K legs, there was a 240K (blue) at Dunkers a couple of
> weeks
> > back that was complete but the way stuff gets shifted there
it's highly
> > unlikely to be
there - it had a full set of QI lights too.
> >
> > On R31 rears,
some combos work well with just the inbuilt proportioning in
> > the master cyl. 200B/R31 with 13/16
Sunny cylinder is one, although you
>
need
> > fairly similar range pads
for it to work well.
> >
> > regards
> > Terry
> >
> > -----Original Message-----
> > From:
[EMAIL PROTECTED]
>
> [mailto:[EMAIL PROTECTED]]On
Behalf Of Leighton
> > Sent:
Thursday, 14 February 2002 5:57 PM
>
> To: [EMAIL PROTECTED]
> > Subject: lOOKING FOR 240 k FRONT END
> >
>
>
> > I know its a long shot but
if any one has got a 240K front end they wanna
> > get rid off could you please let me know???? i am
looking for one
> >
> >
> > alos im going to put the R31 skyline disc brakes on the
rear end of my
> > 1600 - to get
them to work properly do i need a proportion valve or will
> > they work without one???
> >
>
>
> > thanx
> >
> >
Leighton
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please
Note:-
Send (un)subscribe requests
to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
