Na I don't have adjustable bars....

Anyone wont to buy my as new White line front and rear bars so I can go buy
some adjustables :))

Cam
CM510
www.sprite.com.au/cm510
----- Original Message -----
From: "Andrew Greenbury" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 19, 2002 12:55 PM
Subject: Re: Rear Wheel Alignment Settings


> Excellent stuff Cam,
>
> Note if you are planning on increasing the roll resistance at the
> rear, this will probably exacerbate the oversteer problem, whereas
> decreasing it (softer springs bars etc) will reduce it, as will
> increasing front antiroll bar etc.
>
> I think I got that around the right way?!
>
> Do you have adjustable roll bars Cam?
> Andrew
>
> > That makes sense.
> >
> > I'll have to take some measurements and check it tonight.  The car is
> > handling very well on the front....to the point where you turn in that
hard
> > that the front goes through the corner and the rear will suddenly break
away
> > (over-steer)
> >
> > No doubt sway bar and spring/shocks on the rear will affect this as
well.
> >
> > Cam
> > CM510
> > www.sprite.com.au/cm510
> > ----- Original Message -----
> > From: "Andrew Greenbury" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, February 19, 2002 12:05 PM
> > Subject: Re: Rear Wheel Alignment Settings
> >
> >
> > > Hi Cam,
> > >
> > > I cant help with any specific rear toe settings, but rear toe-in is
> > > more stable than rear toe-out, as the rear wheels provide a
> > > stabilising moment trying to turn the car towards the outside of the
> > > corner (and so understeer if taken too far)
> > >
> > > Andrew
> > >
> > > > Hi Guys,
> > > >
> > > > Looking for some pointers with the rear wheel alignment settings for
a
> > > > 1600....more specifically the toe setting.
> > > >
> > > > With a slotted rear crossmember, I can get excellent adjustment of
both
> > > > camber and toe.
> > > >
> > > > Camber, I'm going to run between Zero and neg .5 deg.
> > > >
> > > > But toe ??
> > > >
> > > > Am I correct in saying some toe in on the rear will give extra
> > stabilaty?
> > > >
> > > > Cam
> > > > CM510
> > > > www.sprite.com.au/cm510
> > > >
> > >
> > >
> > >
> >
>
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to