I dont know andything about the l20b/stanza combo, but I have seen
braces that go from each strut to the centre of the firewall to get
over bonnet clearance, it kind of sets up two triangulated sections.
> I had to redo the throttle linkage on my L20B into stanza swap. Then
had to redo it again with the swap to twin SUs. i am now adapting a S2
Bluey cable to go direct to the carbs to bypass ALL the linkages,
which I think are causing a stiff pedal and high idle.
>
> Anyway, have fun.
>
> PS - Does anyone know if you can get a strut brace to go over a L20B
in a stanza??
>
> Cheers
>
> Ross G
>
> > ----------
> > From: andrew smith
> > Reply To: [EMAIL PROTECTED]
> > Sent: Sunday, May 26, 2002 0:24 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: L20 mounts
> >
> > You need the L16 engine mounts, rubbers,and sump and pickup.Just
cut the dip
> > stick to the low mark.You may need to redo the exhaust and carb
linkage
> > depending on what your using.
> >
> > Chris Simpson wrote:
> >
> > > Listers,
> > >
> > > Sorry for all the emails but here goes,
> > >
> > > Im putting this L20 in soon and i want to make sure that i wont
have any
> > > problems with the height of the motor. At present i have the
L16 metal
> > > mounts on the motor with the smaller/thinner rubber insulators.
Im
> > > planning on using the L20 sump (is there any difference between
them
> > > L16?L18?) Im also going to put the "1600 OHC" rocker cover on.
> > >
> > > Is this set up going to clear the cross member? and will it rub
on the
> > > bonnet like alot of people complain about?
> > >
> > > Thanks
> > >
> > > Chris
> > >
> >
> >
> >
>
>
--membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
>
--------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
