Terry, Cool - just found that white/bl ign on my wiring diag - have never realised it was an ign source. i used the old black/white wire to the coil as the thermofan/pump etc ign trigger. the white/blue would have been easier if I had known :( oh well
thanks Andrew On Fri, 14 Jun 2002, Terry Rudd wrote: > Andrew, > > There are 6 wires in the regulator plug behind the battery. > > 1. White/blue - Ign > 2. White - Batt (12v) > 3. Black - Earth (ground) > 4. White/black - Field (from Alt) > 5. Yellow - Ind (from Alt) > 6. White/red Ind (to dash light) > > Wires 5 & 6 are the ones that you connect when you convert from a Hitachi or > Lucas external reg alternator to a Bosch internal reg alternator but you > must disconnect the old external reg at that plug - it's that simple. > > On the old external reg these wires (i.e. 5 & 6) are connected inside the > reg at the + terminal. > > regards > Terry > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
